Epson C11C640001 - LX 300+II B/W Dot-matrix Printer Manuel - Page 16
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Epson C11C640001 - LX 300+II B/W Dot-matrix Printer. Epson C11C640001 - LX 300+II B/W Dot-matrix Printer 17 pages. Epson lx-300: user guide
Également pour Epson C11C640001 - LX 300+II B/W Dot-matrix Printer : Manuel de l'utilisateur (50 pages)
Imprimer la page
Epson LX-300+II
5. If the outer case or paper guide is still dirty, clean it with a
soft, clean cloth dampened with mild detergent dissolved in
water. Keep the printer cover in place and flat on top of the
printer to prevent water from getting inside the printer.
Never use alcohols or thinners to clean the printer;
these chemicals can damage the printer
components as well as the case.
Be careful not to get water on the printer mechanism
or electronic components.
Do not use a hard or abrasive brush.
Do not spray lubricants inside the printer; unsuitable
lubricants can damage the printer mechanism.
Transporting the Printer
If you need to transport your printer for some distance,
carefully repack it using the original box and packing materials
or equivalent packaging.
When transporting the printer, do not lift it by the USB
cable holder as the holder may detach and cause the
printer to fall. Hold the bottom left and right sides of the
printer firmly to lift it.
You need to move the print head by hand to remove
the ribbon cartridge. If you have just used the printer,
the print head may be hot; let it cool for a few
minutes before touching it.
1. Remove any paper loaded in the printer. Make sure the
printer is turned off.
2. Unplug the power cord from the electrical outlet; then
disconnect the interface cable from the printer.
3. Remove the paper guide, the USB cable holder, paper
supports, and knob.
4. Make sure the tractor that comes with your printer is
installed in the push position.
5. If an additional pull tractor is installed, remove it. If any
options are installed, remove them and pack them in their
original boxes.
6. Make sure the print head is not hot. Then remove the
ribbon cartridge.
7. Repack the printer, ribbon cartridge, and paper guide in the
original packing materials and place them in the printer's
original box.
16 - Epson LX-300+II
Related Documentation(
Manual
Epson LX-300+II User's Guide
CD-ROM containing the on-screen
Reference Guide
7/06
Part number
4105348-00/CPD-21412
3101470-00/CPD-21416