Epson C390999 - TM T90 Color Thermal Line Printer Manuel de développement - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de développement pour {nom_de_la_catégorie} Epson C390999 - TM T90 Color Thermal Line Printer. Epson C390999 - TM T90 Color Thermal Line Printer 22 pages. Application development guide posprinter

Imprimer la page

Section 2. Details on Settings

This section describes connection configurations and how to make the settings for the
TM-T90 printers.

2.1 References of Firmware Versions

Refer to the release notes (Relnote.txt).

2.2 Settings of DIP Switches

Confirm that the following settings have been made correctly.
1) Serial port
DIP-SW1
No.
Setting
1
OFF
2
ON
3
OFF
4
OFF
5
OFF
6
OFF
7
ON
8
OFF
Set DIP-SW1-1 (Power button function).
If this DIP Switch is ON, the power button is disabled.
Set DIP-SW1-2 (Interface condition selection).
If this DIP Switch is ON, communications settings are set via DIP Switches. If the
DIP Switch is OFF, Memory Switches are used.
Set DIP-SW1-3 (Handshake) to DTR/DSR.
Set DIP-SW1-4 (Bit length) to 8 bits.
Set DIP-SW1-5 to DIP-SW1-8 accordance with the port information.
The described set values are the default values. For the details, refer to the
product manual of the POSPrinter. Also, if these settings are changed, make
sure to change the port information using the SetupPOS utility.
Settable
Settable
Fixed at OFF
Fixed at OFF
Settable
Settable
Settable
Settable
2
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T90)
Version 2.61 Feb. 2008
DIP-SW2
No.
Setting
1
OFF
Fixed at OFF