Epson CX4200 - Stylus Color Inkjet Instructions d'installation - Page 4

Parcourez en ligne ou téléchargez le pdf Instructions d'installation pour {nom_de_la_catégorie} Epson CX4200 - Stylus Color Inkjet. Epson CX4200 - Stylus Color Inkjet 7 pages. Continuous ink supply system for xm prefilled version with auto reset chips
Également pour Epson CX4200 - Stylus Color Inkjet : Manuel rapide (48 pages), Commencer ici Manuel (8 pages), Fiche technique (6 pages), Manuel de l'utilisateur (18 pages), Mise à jour (1 pages)

Imprimer la page

Epson CX4200 - Stylus Color Inkjet Instructions d'installation

Step 4.

4、

1)Remove old cartridges in the printer (Pic A);

2) Insert the CIS cartridges into the cartridge car (Pic B); Make sure the

cartridges installed well.(Pic.C)

Step 5, Fix Supporting Arm:

5、

1) Tear off the sticker(Pic A); Measure 2.6cm from the edge of the printer, Attach

supporting arm on the printer as Picture B show;

2) The right position like Picture C shown

3) Tear off the sticker of small tube clamp;Attach it at the 4cm away from the

edge of the Printer. As picture F shown.

Rip the label

Step 6. Install the tubing.

6、

Put the tube into the Support Arm and Small Tube clamp as the below picture

shown.

Clamp the tube on the support arm

Stick the Support arm at 3cm distance

from the left side, and at 4 cm distance

from the upside of the printer

Get other manuals https://www.bkmanuals.com

as the position show on

the above picture.

Finish