Epson DFX 8000 Informations sur le produit

Parcourez en ligne ou téléchargez le pdf Informations sur le produit pour {nom_de_la_catégorie} Epson DFX 8000. Epson DFX 8000 8 pages. Product support bulletin(s)
Également pour Epson DFX 8000 : Manuel de déballage et d'installation (31 pages), Bulletin d'information sur les produits (20 pages), Bulletin d'information sur les produits (5 pages), Bulletin d'information sur les produits (3 pages), Bulletin d'information sur les produits (14 pages), Bulletin d'information sur les produits (25 pages), Bulletin d'information sur les produits (16 pages)

Imprimer la page
Epson DFX 8000 Informations sur le produit

Printer Specifications

Printing
Printing method:
9-pin impact dot matrix
Pin
configuration:
Two 9-pin columns
Printing speed:
high-speed
Printing direction:
Bidirectional logic-seeking for tat printing.
Unidirectional for graphics (can also be
switched to bidirectional using the proper
software command).
Line spacing:
increments of
Paper feed speed:
Approx. 17 ms/line at l/&inch line spacing
during continuous feeding
26
ms/line at l/&inch line spacing during
Printable columns:
3Kbyte
Input buffer:
9-Pin Printers
power cable
lock nuts
12
10
12
192
or
of an inch
DFX-8000 DOT-MATRIX PRINTER
Character fonts:
characters:
Paper
Paper type:
Paper weight:
Paper thickness:
5 / 2 3 / 9 0
Available sit&a
Font
Standard
character set
ASCII
(including italic characters)
96 characters
13 international character sets
(including italic characters)
Epson Extended Graphics character set
Continuous-feed paper:
holes
The sprocket
must be perfectly
l
circular or circular and notched.
The holes must be cleanly cut.
l
The perforation between pages should
l
not
way to the edges of
extend all
the
paper, as shown below.
Continuous paper: 14 to 22 Ibs.
(52.6 to 82.7 g/m')
Multi-part fotms:
to 56.4 g/m'] x N)
Continuous paper (including multi-part
forms):
Front - up to 0.46 mm (0.018')
Rear - up to 0.30 mm (O.Ol2')
Up to 0.19 mm (0.0075') including backing
sheet
Overlapping area on overlapping multi-part
up to 0.70 mm (0.028')
with
the
DFX-8000-1