Epson DM-D110 Series Manuel d'installation - Page 37

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Epson DM-D110 Series. Epson DM-D110 Series 42 pages. Usb interface for tm-t88v-dt
Également pour Epson DM-D110 Series : Manuel de l'utilisateur (17 pages), Manuel du produit (27 pages), Fiche technique (2 pages), Fiche technique (2 pages), Manuel de l'utilisateur (20 pages), Manuel de démarrage rapide (2 pages), Manuel de l'utilisateur (44 pages)

Self Test

The DM-D110 has a self test function. If you want to perform a self test,

you must change the setting of the DIP switch.

The following items are checked during the self test:

Control ROM version

DIP switch settings

Memory switch settings

Example of display characters

Example of each function, such as brightness, flashing, and scroll

To perform the self test, follow the steps below.

1. Turn off the power for the DM-D110.

2. Set the SW 1-8 of the DIP switch to ON, and turn on the power.

Note:

If the contents of the self test are not displayed, the DM-D110 may be

malfunctioning. Please contact your DM-D110 dealer for assistance.

When the self test is finished and no error occurs, the DM-D110 is ready

to receive data.

The DM-D110 has the diagnostics function. When the DM-D110 is

turned on, diagnostics, such as internal memory test, is carried out

regardless of the DIP switch settings. When an error is detected, the

error message is displayed and no operation is carried out until power

is turned off.