CREE LIGHTING OSQ Series Instructions d'installation - Page 3
Parcourez en ligne ou téléchargez le pdf Instructions d'installation pour {nom_de_la_catégorie} CREE LIGHTING OSQ Series. CREE LIGHTING OSQ Series 3 pages. Led area light, trunnion mount
Imprimer la page0.55 in
14mm
0.43 in
11mm
0.80 in
20mm
ELECTRICAL CONNECTIONS
STEP 1:
NOTE: Luminaires with PML sensor will have the dimming leads
capped off. Keep the dimming leads on these luminaires capped
off.
Using Listed 90°C minimum rated wire connectors make the
following electrical connections within the adjustable fitter
wiring compartment:
a. For 120/277/347V connect the black fixture lead to the
voltage supply or Hot 1 (for 208/240/480V wiring).
b. For 120/277/347V connect the white fixture lead to the
neutral supply or Hot 2 (for 208/240/480V wiring).
c. Connect the green or green/yellow ground lead to
ground.
d. If Dimming is an option; connect the blue dimming
positive fixture lead to the supply dimming positive lead.
e. If Dimming is an option; connect the white/black
dimming negative fixture lead to the supply dimming
negative lead.
f.
Connect orange fixture lead to orange supply lead.
g. Connect red fixture lead to brown supply lead.
© 2019 Cree Lighting, A company of IDEAL INDUSTRIES. All rights reserved. For informational purposes only. Content
is subject to change. See www.creelighting.com/warranty for warranty and specifications. Cree
registered trademarks of Cree, Inc. NEMA
3 of 3
is a registered trademark of the National Electrical Manufacturers Association.
®
TEMPLATE
6.10 in
155mm
LINE
OR HOT 1
GREEN
NEUTRAL
OR HOT 2
VIOLET
GREY
ORANGE
BROWN
and the Cree logo are
®
3.35 in
85mm
0.43 in
11mm
LUMINAIRE
LINE-BLACK
GROUND-GREEN
NEUTRAL-WHITE
DIM (+) BLUE
DIM (-)
WHITE/BLACK
ORANGE
RED
www.creelighting.com
LPN00316X0003A0_C