Architectural Mailboxes 2507 Instructions de montage

Parcourez en ligne ou téléchargez le pdf Instructions de montage pour {nom_de_la_catégorie} Architectural Mailboxes 2507. Architectural Mailboxes 2507 2 pages. Wall mount mailbox

Imprimer la page

IMPORTANT! This

mailbox is intended to be

mounted under an eave or

another protected area.

Using the guide on the back of these instructions,

mark the wall at the center of each crosshair. Use a

level to ensure a straight installation (optional).

Drill into the wall at each marked location. Use a

1/4" drill bit for brick or other masonry wall. Use a

1/16" drill bit for wood wall.

1/4" masonry bit

- or -

1/16" wood bit

Questions, Comments, Concerns?

www.architecturalmailboxes.com

[email protected]

Wall Mount Mailbox | Model 2507

MOUNTING INSTRUCTIONS

Hardware

(included)

x 4, screws

x 4, plastic

anchors

Need keys? Visit us at...

www.architecturalmailboxes.com/keys

Tools

(not included)

One Drill

Skip this step if installing into wood.

Insert the included plastic anchors into the drilled

holes. Gently tap them in if necessary.

Insert the screws into the top two drilled holes and

secure with a screwdriver. Hang the mailbox onto

the secured screws using the top eyelet holes on

the back of the mailbox.

While the mailbox is hanging on the top screws,

insert the remaining two screws into the bottom

holes and secure with a screwdriver.

One Phillips Screwdriver

One Drill Bit

1/4" masonry bit or 1/16"

wood bit

Find us on social media!

@archmailboxes

Rev. E