Architectural Mailboxes 2622526 Instructions de montage
Parcourez en ligne ou téléchargez le pdf Instructions de montage pour {nom_de_la_catégorie} Architectural Mailboxes 2622526. Architectural Mailboxes 2622526 2 pages. Mailbox with 2” round in-ground mailbox post
Imprimer la page
MB1 Mailbox with 2" Round In-Ground Mailbox Post (Model 7680)
Thank you for purchasing this premium mailbox and post. We know you'll be satisfied with the years of service it will provide. If you have any
questions about how to assemble or install this product, or if you need any replacement parts, please call us directly at (800) 464-7491 or
contact us at [email protected].
Assembly Instructions
Tools (not included)
Two open end wrenches
Phillips head screwdriver
- or -
!
DO NOT install into ground until both post pieces are securely connected using the expansion joiner.
CONTACT THE LOCAL POST OFFICE BEFORE INSTALLING THE MAILBOX TO ENSURE ITS CORRECT PLACEMENT AND HEIGHT AT THE STREET. GENERALLY, MAILBOXES ARE INSTALLED AT A HEIGHT OF 41-45
INCHES FROM THE ROAD SURFACE TO INSIDE FLOOR OF THE MAILBOX OR POINT OF MAIL ENTRY (LOCKED DESIGNS) AND ARE SET BACK 6-8 INCHES FROM THE FRONT FACE OF CURB OR ROAD EDGE TO
THE MAILBOX DOOR.
1
Lay post pieces and the metal expansion
a.
joiner on a flat surface. Then, insert the joiner
into one post piece making sure to align the
screw holes.
c.
Repeat step 1b to properly assemble the
second post piece, making sure to
minimize the gap between the post
pieces.
Correct Post Assembly
Set screw
completely
recessed.
Set screw is
making contact
with the
Expansion joiner is
expansion
making contact with
joiner.
the post.
Assembly Instructions
Tools (included)
Hardware (included)
1
To join the two post pieces:
Hex wrench
b.
Insert the headless set screw into the hole and
tighten with the hex wrench.Tighten the screw
until resistance is felt. Then, tighten at least
another rotation to ensure the joiner is locked in
place as shown in the diagram below.
Incorrect Post Assembly
Set screw is
Set screw is
exposed.
not making
contact with the
expansion
joiner.
Expansion joiner is
not making contact
with the post.
3
To attach the mailbox to the plate:
x 4, small hex bolts
x 1, metal expansion joiner
x 2, headless set screws
2
Install the assembled post into
the ground. Pay particular
attention to the location,
height, and distance from the
street.
A concrete footing is highly
recommended. Typical post
depths range from 12"-18" and
may vary based on your
installation application.
www.architecturalmailboxes.com
x 8, small washers
x 4, small hex nuts
x 2, hole plugs
3
x4
x4
Mount the mailbox onto the
top bracket and secure with
the 4 hex bolts, 8 washers,
and 4 hex nuts.
Lastly, insert hole plugs to fill
the two joint holes.
(800) 464-7491
Rev. E
© 2018, Architectural Mailboxes, LLC
hole plugs x2
R