Creek Audio OBH 15 Mode d'emploi
Parcourez en ligne ou téléchargez le pdf Mode d'emploi pour {nom_de_la_catégorie} Creek Audio OBH 15. Creek Audio OBH 15 2 pages. Phono pre-amplifier
Imprimer la page
SPECIFICATION
MOVING MAGNET
GAIN
FREQUENCY RESPONSE
SIGNAL TO NOISE RATIO
TOTAL HARMONIC DISTORTION
RIAA DEVIATION
OUTPUT
OUTPUT IMPEDANCE
INPUT SENSITIVITY/IMPEDANCE
OVERLOAD MARGIN
MATES WELL WITH MM CARTRIDGES
MOVING COIL
GAIN
FREQUENCY RESPONSE
SIGNAL TO NOISE RATIO
TOTAL HARMONIC DISTORTION
RIAA DEVIATION
OUTPUT
OUTPUT IMPEDANCE
INPUT SENSITIVITY/IMPEDANCE
OVERLOAD MARGIN
MATES WELL WITH MC CARTRIDGES
DIMENSIONS
POWER SUPPLY VOLTAGE
WARRANTY
If within two years of the purchase date your OBH product proves to
be defective for any reason other than accident, misuse, neglect,
unauthorised modification or fair wear and tear, Creek Audio Ltd
will, at its discretion, replace the faulty parts without charge for
labour or return carriage within the U.K.This warranty is valid only
within the U.K. and given in addition to statutory rights. Service
enquiries outside the U.K. should be addressed first to the
supplying dealer and or Creek distributor/importer. Warranties
granted in these countries are entirely at the discretion of the
distributor.
Creek Audio Limited
12 Avebury Ct, Mark Road, Hemel Hempstead HP2 7TA England
Telephone: +44 (0) 1442 260146 Fax: +44 (0) 870 622 0846
E-mail: [email protected] Web: www.creekaudio.com
37dB
20 Hz to 20 kHz +/- 0.25 dB
-83 dB
< 0.03%
+/- 0.5%
250 mV
< 100
3.5 mV / 47 k
220 pF
22 dB
2.5 mV - 5 mV output
56 dB
20 Hz to 20 kHz +/- 0.25 dB
- 75 dB
< 0.05%
+/- 0.5%
250 mV
< 100
0.5 mV / 1000
3300 pF
20 dB
0.5 mV - 1 mV output
150 x 100 x 66 mm
24V DC 30 mA
Thank you for purchasing the OBH 15 phono pre-amplifier. You are
now in possession of a state-of-the-art product. The functions and
operation of the OBH 15 are extremely simple. The following notes
are provided to explain all aspects of its design and use.
The function of the OBH 15 is to boost the level and correct the
frequency response of a low level signal coming from a phono pick-
up on a conventional turntable.
The signal required by most modern amplifiers is described as
being 'LINE' level, which is, in technical terms, between 200 and
500 milli Volts with a flat frequency response.
Unless your amplifier has a specific 'Phono' or Disc input, the level
will be too low and the frequency response will be wrong. The
OBH 15 is designed to boost the signal and introduce an R.I.A.A.
frequency response characteristic.
Creek OBH 15
Phono Pre-Amplifier
Operating
Instructions