Cremesso CAFFE Latte Manuel de l'utilisateur - Page 11
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Cremesso CAFFE Latte. Cremesso CAFFE Latte 20 pages.
Imprimer la page
Special functions
20
Programming the milk output quantity
Insert milk tank (➔ p. 12).
Programming: Place cup under
output nozzle
Coffee output starts (with
milk). As soon as the programmed
amount is in the cup, press key
again (all keys light up again)
1.
3.
2.
Load capsule: 1. Push operating
lever right back. 2. Let capsule
fall squarely into opening. 3. Pull
operating lever right forward
Programming is finished. Repeat
again with another key if desired
3 sec.
Hold down the key to be pro-
grammed, e.g.
, (min. 3
seconds) until it flashes quickly.
Then it flashes slowly to indicate
heating up
Good to know
Coffee/milk quantity: can be programmed for each of the three coffee or four
milk output keys. The cleaning key is not programmable (starts decalcification).
The programming range is the same for all coffee/milk output keys.
Factory settings:
–
Ristretto
(«small cup», 30 ml)
Espresso
–
(«medium cup», 50 ml)
–
Lungo/Tea
(«Tea cup/big cup», 110 ml)
–
Milk foam
(14 sec. milk foam output)
–
Latte Macchiato (22 sec. milk foam output, 50 ml coffee)
Cappuccino
–
(10 sec. milk foam output, 50 ml coffee)
–
Milk coffee
(8 sec. warm milk output, 100 ml coffee)
– Delete all settings (= factory setting): hold down cleaning key
switch on machine
Milk foam output starts (with
first coffee). As soon as the programmed
amount is in the cup, press key again
(output stops and key flashes slowly to
indicate heating up)
and
21