Crena QH-200Q Manuel d'instruction - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Crena QH-200Q. Crena QH-200Q 13 pages. Quartz heater

MPORTANT

The wires in the main lead are coloured in accordance with the following code:

Green and yellow: Earth

Blue: Neutral

Brown: Live

The green and yellow wire must be connected to the terminal marked with letter E

or the earth symbol.

The blue wire must be connected to the terminal marked with the letter N or

coloured black.

The brown wire must be connected to the terminal marked with letter L.

Holding the main wire by mean of the screw B.

Put the cover black into its place on the wall support and fasten it by means of the

appropriate screw.

Unscrew by one turn the screws which regulate the inclination of the appliance.

Determine the desired heating inclination and fasten the screw by means of the

screws (A).

Do not change the inclination without loosening the appropriate screws.

Otherwise permanent damage could be caused to the appliance.

IMPORTANT

During the assembly is important to be especially careful to touch with the hands

the heating elements as this could leave spots which would diminish the thermal

radiation.

INSTRUCTION FOR USE

In order to pull the appliance on, use the pull switch.

Mod.QH-1200C 0=Off; 1=600W; 2=600W; 3=1200W

If you notice while pulling on the appliance that there are slight vibrations

which gradually fade away, don't become unduly alarmed. This is part of

the normal behaviour of the appliance.

MAINTENANCE

Before undertaking any maintenance operation, disconnect the appliance from the

power supply.

This appliance does not require any particular maintenance. For cleaning it is

recommended to use a soft moist rag and neutral detergent. Do not use an

abrasive cloth or devices which could effect the outward appearance of the

appliance. Check that the parts exposed to the heat rays and the ventilation are

free of dust and dirt.

During the cleaning, be careful not to touch the quartz heating elements.

In case of breakdown and/or poor function of the appliance, disconnect the

appliance from the power supply and contact an authorized service center. Always

request the use of original spare parts.