Digikeijs DR 4088 series Manuel d'instruction - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Digikeijs DR 4088 series. Digikeijs DR 4088 series 12 pages. Feedback module
Également pour Digikeijs DR 4088 series : Manuel d'instruction (11 pages)
Imprimer la page
DR4088CS / GND / OPTO
3.2 Reset DR4088xx
Important!
The DR4088xx The DR4088xx has no function for resetting to factory settings!
Since no settings or functions are stored in the feedback module, this is not necessary!
4.0 Connection examples
In this chapter you will find some connection examples for the DR4088xx. Please note that we are not able to show all possibilities.
Important! DR4088GND 3-wire operation:
Due to the H-bridge (track output) in the DR50xx, feedback devices in the DR4088GND version must not be used against track ground, as is usu-
ally the case with 3-wire tracks. This inevitably leads to the destruction of the DR50xx.
If a 3-wire driver still wants to drive with the DR50xx and report back against track ground, the DR4088OPTO
can be used.
www.digikeijs.com
® R-Bus, B-Bus are trademarks which are registered in the name of Modelleisenbahn GmbH. XpressNet and RS-Bus is a trademark registered in the name of Lenz
2021-08-11
P 7