Archos Jukebox Multimedia 120 Manuel de l'utilisateur - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Archos Jukebox Multimedia 120. Archos Jukebox Multimedia 120 5 pages. Stereo fm radio / remote control / microphone for jukebox multimedia 10/20, jukebox multimedia 120, av 100 series
Également pour Archos Jukebox Multimedia 120 : Manuel de démarrage rapide (7 pages)

Imprimer la page

2.4

Recording from the Radio

When you hear something on the radio you would like to record, click once on the REC

button. The REC button will light up red to indicate that a recording is taking place. Click it

again when you want to stop the recording. The file name for this recording will be

RADIOxxxx.mp3, where xxxx are incremental numbers. It will be saved in the last folder

you were in before you switched to the FM mode. You can change the recording gain while

recording, by pressing the rocker to the left (less gain) or to the right (more gain).

2.5

Retro Recording and Editing

Retro-recording: This a feature that allows you to capture the 30 seconds (approximately) of

Radio before the record button is pressed. It does this by continuously recording 30 seconds

of music in a buffer, then when you click on Rec to record the Radio, it adds this 30 seconds

to the front of your recording. This way, if you start recording a radio song after it has started,

you will actually have the entire song in the recording. The Retro-Record setting must be set

to ON in order for this to work. On the Jukebox, go to Setup > [FM Radio] > Retro-

Recording: On. You will notice that when a retro-recording begins, the display will already

show an elapsed time of 00:28 (28 seconds).

Editing: Once a retro-recorded song has been recorded, it can be edited on the Jukebox itself.

Often, the beginning of the recording will include a commercial or announcer talk that you do

not want to keep, but was also recorded during the buffered 30 seconds. Locate this file on your

Jukebox and play it. You notice that F1 is now called Edit. Click on F1 and you will go into the

Editing mode to cut out portions from the beginning and end of the song that you do not want.

The song will continually loop while in editing mode. You can use the regular Forward

and Reverse

buttons to move around within the song. While the song is playing, wait for

the precise moment that you want the edited song to start and click F1 I-cut (In cut). This is

the point that your new edited song will start. Let the song continue and then at the precise

moment you want the edited song to stop, click on F2 O-cut (Out cut). This is the point that

your new edited song will stop. Now click on F3 Close, which will ask you if you want to

keep your edit. If you are not happy with your edit, just click on No and retry another edit.

If you click Yes, the Jukebox will run through a short Read/Write process and create a new

file which will be your edited file. It will have the same name as the original file but with the

word edit appended to it.

2.6

Recording from the Microphone

From the browse mode, go to the folder where you want your voice recording to be saved. Then,

simply press on the REC button and speak into the microphone (the small hole next to the

MP3/FM button). The REC button will light up red to indicate that a recording is taking place.

Click it again when you want to stop the recording. The file name for this recording will be

VOICExxxx.mp3, where xxxx are incremental numbers. You can change the recording gain

while recording, by pressing the rocker to the left (less gain) or to the right (more gain).

2.7

Playing MP3 files

While in browse mode, you can use the FM remote to search for and play MP3 files. If you

are in the FM mode, just click on the MP3/FM button to go to Browse mode. Use the Rocker

button as you would the LEFT

, PLAY , and RIGHT

the Increase

and Decrease

buttons on the Remote FM as you would the Up

Down

buttons on the Jukebox itself. Thus you will be able to move through the directory

structure with your Remote FM to find and play MP3 or other files.

2.8

Setting Parameters

To change the Remote FM parameters, you must, on the Jukebox itself, go to Setup, then

[FM Radio].

FM Band

Make sure you have the correct FM setting. Go to your Jukebox

Setup [F3] then go to FM Radio then to FM Band. The

specifications for the modes are as follows:

USA: 87.5 - 108 Mhz de-emphasis 75µs

Europe: 87.5 Mhz – 108 Mhz de-emphasis 50 µs

Japan: 76 Mhz - 91 Mhz de-emphasis 50 µs

FM Recording (and microphone)

You can adjust the quality of the FM recording or the microphone

recording with this setting. A setting of 5 on quality, and a sample

rate of 44.1 kHz corresponds to CD quality. The higher each of

these settings is made, the more space will be consumed on your

hard drive. See your Jukebox manual for the table listing the

approximate bit rates for these settings. The microphone recording

quality is set with this same setting. Setting the bitrate to 3 and the

sample rate to 22kHz, will save space on your hard drive and you

will hear little difference in the recorded voice quality.

Retro-Recording

As explained in the section above, the retro-recording must be set

to On in order to work. When off, radio recordings start within a

second of the moment you click the REC button.

buttons on the Jukebox itself. Use

and