Cres Cor H138NPSCMQ Series Manuel d'utilisation et d'entretien - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Cres Cor H138NPSCMQ Series. Cres Cor H138NPSCMQ Series 7 pages. Hot cabinet
Imprimer la page
Holding Cabinet
Rev. 3 (3/14)
OPERATING and MAINTENANCE INSTRUCTIONS
ELECTRICAL SPECIFICATIONS:
Model No.
H138NPSC
H138NPSC-15A
Note: The above model numbers are basic models. They will be followed by numbers and letters.
INSTALLATION:
1. Remove all paper and packing material from
inside of cabinet.
2. Remove protective paper and vinyl material from
outside surfaces of cabinet.
3. Place the cabinet in a well-ventilated area.
4. Place cabinet on level floor.
5. Plug cord end into proper wall outlet.
WARNING
FIRST TIME START-UP:
1. Push the POWER switch to "ON", and run the
unit for one hour.
NOTE: DO NOT PUT FOOD INTO CABINET!
This step is to burn off manufacturing oils and excess
adhesive.
2. Let the cabinet cool and wipe inside clean with
detergent and hot water before first use.
FL-2331
Page 2 of 7
Models: H138NPSC Series Hot Cabinet
Volts
120
120
POWER
LIGHT
Air is VERY HOT
when door is opened.
5925 Heisley Road • Mentor, OH 44060-1833
Watts
Amps
2000
16.6
1500
12.5
POWER
TEMPERATURE
SWITCH
ADJUST
ADJUST
TEMPERATURE
BUTTONS
HOW TO HOLD:
1. Push POWER switch to "ON." Yellow POWER
LIGHT will come on.
2. Push the "SET" button on the TEMPERATURE
CONTROL. The TEMPERATURE DISPLAY will
show "SP1" (set point 1).
3. Press "SET" again and the current set point temperature
will be displayed.
4. Press the ADJUST buttons to adjust to the
desired temperature.
5. Press "SET" to save the temperature setting.
6. Preheat cabinet for 45 minutes.
7. Put product into cabinet.
NOTE: Proper food holding temperature is
140°F/60°C or higher.
WARNING
Blower inlet guard must be in place before
operating cabinet.
Hertz
Phase
60
1
60
1
CONTROL
°F
SET
"SET" BUTTON
DISPLAY
NEMA
5-20P
5-15P