Digilent chipKIT Network Shield Manuel de référence et guide de l'utilisateur - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel de référence et guide de l'utilisateur pour {nom_de_la_catégorie} Digilent chipKIT Network Shield. Digilent chipKIT Network Shield 11 pages. Chipkit network shield board
Également pour Digilent chipKIT Network Shield : Manuel de référence (11 pages)
chipKIT Network Shield Reference Manual
different value is needed or some other device
2
on the bus is providing the pull-ups or if I
C #2
isn't being used and the pull-ups are interfering
with the use of the pins. The on-board pull-ups
are enabled by install shorting blocks on JP10
and JP11. Removing the shorting blocks
disables the pull-ups.
Digilent has several small I/O modules
2
available that can be connected using the I
C
connector. These include a 3-axis
accelerometer, 4-channel, 12-bit A/D
converter, serial character LCD panel, 3-axis
gyroscope, real-time clock/calendar, and I/O
expander.
2
EEPROM: A 256Kbit (32Kbyte), I
C EEPROM
is provided using a Microchip 24LC256. This
EEPROM, IC5, is located on the bottom of the
board.
2
The EEPROM is on I
C bus #1, and its seven
2
C device address is '1010000'.
bit I
Digilent provides a library for accessing this
EEPROM. The library is available on the
Digilent web site and in the third party libraries
repository on github.
For complete technical documentation on the
24LC256, refer to the data sheet available on
the Microchip web site.
32.768Khz Oscillator
A 32.768Khz oscillator is provided to use as a
clock source for the Real Time Clock/Calendar
(RTCC) peripheral in the PIC32MX796
microcontroller on the Max32 board. The
output of this oscillator connects to pin 12 or
connector J11.
On the Max32 board, this signal connects to
signal RC13, which connects to pin 73 on the
PIC32 microcontroller. This pin provides the
secondary oscillator input, which can be used
to clock the RTCC in the PIC32
microcontroller.
www.digilentinc.com
page 9 of 11
Copyright Digilent, Inc. All rights reserved. Other product and company names mentioned may be trademarks of their respective owners.