Cres Cor HC1-UA-11 Manuel d'utilisation et d'entretien - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Cres Cor HC1-UA-11. Cres Cor HC1-UA-11 8 pages.

Imprimer la page

5925 Heisley Road • Mentor, OH 44060-1833

HOW TO HOLD FOOD:

WARNING

PROCEDURE FOR LIGHTING:

NOTE: DO NOT PUT FOOD INTO CABINET!

This step is to burn off manufacturing oils and excess

adhesive. Let the cabinet cool and wipe inside clean

with detergent and hot water before first use.

Dials must be operated by hand . DO NOT use pliers,

wrenches or other tools to turn dials .

The Gas Valve Dial cannot be turned to "OFF" position

without first depressing dial in "PILOT" position and then

rotating to "OFF" .

1 . Turn thermostat knob to "HIGH" .

2 . Turn Gas Valve Dial to the "PILOT" position.

3. DEPRESS and HOLD Gas Valve Dial, allow pilot to

burn approximately 30 seconds before RELEASING

Gas Valve Dial. If pilot does not remain lighted, repeat

operation allowing longer period before releasing Gas

Valve Dial.

4 . The appliance is now in operation . When heat is

desired, turn Gas Valve Dial to "ON" position. When

heat is no longer required, turn Gas Valve Dial back to

"PILOT" position .

5 . When the unit is in the "ON" position adjust the ther-

mostat accordingly ("High", "Medium", "Low") .

Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com

OPERATING INSTRUCTIONS

Air is VERY HOT

when door is opened.

Holding Cabinet

Rev. 1 (07/15)

NOTE: When unit is not in use, ALWAYS store unit with

the Gas Valve Dial in the "OFF" position. Remove

the propane source for added safety and turn the

thermostat to the "OFF" position .

FL-2387

Page 5 of 8