Digilock NEXT Sola3 Keypad Manuel du produit - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel du produit pour {nom_de_la_catégorie} Digilock NEXT Sola3 Keypad. Digilock NEXT Sola3 Keypad 9 pages. Key managed
Également pour Digilock NEXT Sola3 Keypad : Manuel du produit (5 pages)
Imprimer la page
Support
Sleep Mode
After three consecutive incorrect User Code entries to unlock, the lock will enter Sleep Mode for one minute. For each subsequent incorrect
entry, the lock will remain in Sleep Mode for an additional minute. The keypad is disabled while in Sleep Mode. A valid Manager Key may be
used to unlock while the lock is in Sleep Mode.
Low Battery Indicator
After locking or unlocking, the lock emits two sets of three beeps indicating that the batteries are low. Replace the batteries.
Does not Unlock with the User Code or User Key
The lock does not recognize the User Code or User Key. For immediate access, operate with a valid Manager Key. If in assigned use
functionality, follow instructions to Assign the User Credential to assign a new User Code or User Key to the lock.
Does not Operate with a Manager Key
The lock does not recognize the Manager Key. Follow instructions to Add Manager Keys to program the Manager Key to the lock. For
immediate access, operate with another valid Manager Key.
Does not Operate with the Programming Key
The lock does not recognize the Programming Key. If the Programming Key has been replaced, operate with the Replacement
Programming Key. Contact Digilock support for additional assistance.
No Audible Feedback when = is Pressed
The lock may be in Sleep Mode or the batteries may need to be replaced. For immediate access, operate with a valid Manager Key.
Battery Replacement
1
Remove the 2 battery cover
plate screws.
Loosen the battery cover by inserting
a small fl at-head in either the top or
bottom notches of the cover plate.
070318
PG-NLS3/P-K-KT/P-DEN
Product Guide
2
Pull the battery pack from the
front housing.
Keypad
Key Managed
Shared & Assigned Use Functionality
It is not necessary to uninstall the lock from the door.
In case of battery failure, operate with a valid Manager Key.
3
Remove batteries and replace
with two premium lithium
CR2450 batteries.
4
Re-Insert the battery pack and
screw cover plate in place.
Phone: 707 766 6000
www.digilock.com | [email protected]