Digilock DCK1-ATV1 Manuel du produit - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel du produit pour {nom_de_la_catégorie} Digilock DCK1-ATV1. Digilock DCK1-ATV1 4 pages. Keypad cam locks advanced security shared use

Imprimer la page

For Lost or Stolen Keys

For a lost or stolen Programming Key:

The lost/stolen Programming Key will continue to operate the lock(s) until it is replaced. Immediately order a Replacement

Programming Key from your Digilock Product Representative. Once received, follow enclosed instructions to set up the lock(s) to

operate with the Replacement Programming Key.

For a lost or stolen Manager Key(s):

Lost/Stolen Manager Key(s) will continue to operate the lock(s). To prevent the lost/stolen Manager Key(s) from operating the

lock(s), erase all registered Manager Key(s) and register only the remaining Manager Key(s).

Collect all remaining Manager Key(s).

Press = ` 55 `. The LED will start to flash.

Touch the Programming Key to the key slot until a two tone beep is heard and the LED turns on.

Touch the Programming Key to the key slot again until three sets of two-tone beeps are heard and the LED turns off.

All previously registered Manager Key(s) have been erased from the lock.

Follow Register/Add Manager Key(s) instructions to register the remaining Manager Key(s).

Operating Instructions

Operate with any User Code:

▪

To lock: Close the door, press = _ _ _ _ `, then turn the knob/lever to the locked position.

▪

To unlock: Press = _ _ _ _ `, turn the knob/lever to the unlocked position, then open the door.*

(the same 4-digit code)

Operate with any User Key:

▪

To lock: Close the door, touch any User Key to the key slot, then turn the knob/lever to the locked position.

▪

To unlock: Touch the same User Key to the key slot, turn the knob/lever to the unlocked position, then open the door.

Operate with a registered Manager Key**:

▪

To lock: Close the door, touch a registered Manager Key to the key slot, then turn the knob/lever to the locked position.

▪

To unlock: Touch a registered Manager Key to the key slot, turn the knob/lever to the unlocked position, then open the door.

Operate with the Programming Key**:

▪

To lock: Close the door, press = `, touch the Programming Key to the key slot, then turn the knob/lever to the

locked position.

▪

To unlock: Press = `, touch the Programming Key to the key slot, turn the knob/lever to the unlocked position, then open

the door.*

*The lock will go into "Sleep Mode" after 3 consecutive incorrect entries.

** When locked with a registered Manager Key or the Programming Key, the previous User Code or User Key will

continue to operate the lock.

Product Guide

Keypad Cam Locks Advanced Security

Shared Use

(any 4-digit code)

DCK1-ATV1

www.digilock.com | [email protected]

Phone: 707 766 6000