ABB Navigator 550 Manuel - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} ABB Navigator 550. ABB Navigator 550 9 pages. Low level dissolved oxygen wet-section
Également pour ABB Navigator 550 : Instructions de mise en service (8 pages), Procédures de remplacement (8 pages), Manuel de démarrage rapide (8 pages), Manuel (6 pages), Procédures de remplacement des pièces détachées (4 pages)
Imprimer la page
3
Mounting the wet-section
Refer to Fig. 2 for wet-section dimensions. The wet-section weighs 4.5 kg (10 lb).
Note. Clearance – the enclosure doors can open 180°. If mounting in a confined area, allow sufficient clearance for door opening.
Dimensions in mm (in.)
386
(15.19)
Sample drain
(calibration)
Sample
outlet
1
*For M6 or
/
in. fastener.
4
Fig. 2 Low level dissolved oxygen wet-section dimensions
Referring to Fig. 3:
1. Mark the wall using the dimensions shown.
2. Drill and plug 3 holes
1
or
/
in. fixings.
4
A
3. Screw in top fixing
between the fixing head and the wall.
A
Note. Fixing
wet-section is placed over it.
4. Hang the wet-section onto fixing
firmly against the wall.
5. Secure the wet-section to the wall using 2 fixings
CI/ADS550–EN Rev. D
Ø 7 (0.27)*
480
(18.90)
210 (8.27)
210
REF
67
Sample inlet bulkhead connector –
(2.63)
suitable for either 6 mm or
A
B
and
in the wall suitable for M6
, leaving a gap of 20 mm (0.78 in.)
cannot
be
adjusted
once
A
, ensuring it is retained
B
281 (11.06)
281
DOOR OPEN
185 (7.28)
185
37 (1.45)
Sample drain (calibration)
1
/
in. pipe
4
Dimensions in mm (in.)
386
(15.19)
the
.
Fig. 3 Mounting the wet-section
Navigator 500
290 (11.41)
290
290
210
210
CTRS
CTRS
Sample inlet
bulkhead connector
Allow sufficient
210 (8.27)
clearance for
fully-open door
Ø 7
(0.27)*
80.2
(3.15)
5