Crescent BA551 Manuel de dépannage - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel de dépannage pour {nom_de_la_catégorie} Crescent BA551. Crescent BA551 2 pages.
ATTENTION! Do not use the machine before you have read and understood the Instructions for use manual
The machine
doesn't work
as it should?
1 Check if the power cable is correctly
connected.
The suction
doesn't work
as it should?
1 Check if the suction hose is
correctly installed and cleaned.
The machine
doesn't clean
as it should?
1 Check if you have the right
detergent and water settings.
The brushes
don't work as
they should?
Check if the brush are correctly
1.
installed and not worn out.
All manuals and user guides at all-guides.com
2 Check if the battery is charged.
2 Open the recovery tank and check
if the vacuum grid and gasket are
cleaned.
2 Check if the solution/clean water
tap is open.
2.
Check if there isn't any brush motor
overload i.e. 3 battery Ledsflash
simultaneously.
3 Turn the ignition key to "0", then
4 Check if the surfaces has a gradient
try to start the machine without
pressing the paddle.
3 Check if squeegee blades are dam -
4 Close the recovery tank cover prop -
aged or dirty.
3 Check if the solution filter is
4 Check if the isn't any dirty in the
cleaned.
3.
Check if there are external materials
avoiding brush rotating.
www.crescentindustrial.co.uk
BA551
exceeding the specifications.
erly and/or verify the gasket wear.
EcoFlex™ system.