Diginet LEDsmart MMDM/PB Manuel d'installation - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Diginet LEDsmart MMDM/PB. Diginet LEDsmart MMDM/PB 16 pages. Push button dimmer with built in on / off switch and multi-way control

Imprimer la page

Wiring for multi-way (three-way or more) dimming and switching

To achieve multi-way dimming and switching using LEDsmart

parallel. Note that each LEDsmart

required to provide multi-way dimming and on/off control.

The diagram below shows the required wiring for three-way dimming and switching using LEDsmart

three-way control is required, further LEDsmart

New Installation – multi-way (three-way or more) dimming/switching

Three-way dimming and switching using LEDsmart

dimmer is simply wired in parallel.

Replacing existing multi-way switching with multi-way dimming and switching

Existing three-way switching

Traditional three-way switching using two rocker switches

and one intermediate switch, with strappers between the

switches.

dimmer has an integrated switch, therefore no separate switches or additional strappers are

devices are simply wired in parallel.

dimmers. Note that each two-wire LEDsmart

dimmers, the required number of dimmers can be connected in

Replacement three-way dimming/switching

Rocker switches and intermediate switch replaced with

LEDsmart

dimmers. The existing strappers are used to connect

the dimmers in parallel. No new wiring is required.

Push Button Dimmer/Switch

dimmers. If more than