Cisco 2950C-24 - Catalyst Switch - Stackable Fiche technique - Page 10

Parcourez en ligne ou téléchargez le pdf Fiche technique pour {nom_de_la_catégorie} Cisco 2950C-24 - Catalyst Switch - Stackable. Cisco 2950C-24 - Catalyst Switch - Stackable 19 pages. Catalyst 2950 series switches with enhanced image software
Également pour Cisco 2950C-24 - Catalyst Switch - Stackable : Bulletin d'information sur les produits (3 pages), Bulletin d'information sur les produits (5 pages), Manuel de migration (25 pages)

Cisco 2950C-24 - Catalyst Switch - Stackable Fiche technique
Feature
Benefit
Manageable through CiscoWorks network management software on a per-port and per-switch basis, providing a
Support for
common management interface for Cisco routers, switches, and hubs.
CiscoWorks
Simple Network Management Protocol (SNMP v1, v2, and v3 (noncryptographic) and Telnet interface support delivers
comprehensive in-band management, and a CLI-based management console provides detailed out-of-band management.
Cisco Discovery Protocol Versions 1 and 2 enable a CiscoWorks network management station to automatically discover
the switch in a network topology.
Supported by the CiscoWorks 2000 LAN Management Solution.
Cisco Device Manager is an embedded web-based software that allows the customer to easily configure and troubleshoot
Ease of Use
the switch, eliminating the need for more complex terminal emulation programs and CLI knowledge, and reducing the
and Ease of
cost of deployment by enabling less-skilled personnel to quickly and simply set up switches.
Deployment
Cisco Express Setup allows the customer to quickly and easily initialize a switch with a web browser.
Smartports offers a set of verified feature macros per connection type in an easy-to-apply manner. With these macros,
users can consistently and reliably configure essential security, availability, quality of service, and manageability features
recommended for Cisco Business Ready Campus solutions with minimal effort and expertise.
The Cisco GigaStack Gigabit Interface Converter (GBIC) delivers a hardware-based, independent stacking bus with up
to 2 Gbps forwarding rate in a point-to-point configuration, or 1 Gbps of forwarding bandwidth when daisy-chained with
up to nine switches.
Auto-configuration eases deployment of switches in the network by automatically configuring multiple switches across
a network via a boot server.
Automatic QoS (Auto-QoS) greatly simplifies the configuration of QoS in VoIP networks by issuing interface and global
switch commands that allow the detection of Cisco IP phones, the classification of traffic, and egress queue
configuration.
Auto-sensing on each non-GBIC port detects the speed of the attached device and automatically configures the port for
10-, 100-, or 1000-Mbps operation, easing the deployment of the switch in mixed 10, 100, and 1000BASE-T
environments.
Auto-negotiating on all ports automatically selects half- or full-duplex transmission mode to optimize bandwidth.
Cisco VTP supports dynamic VLANs and dynamic trunk configuration across all switches.
Voice VLAN simplifies telephony installations by keeping voice traffic on a separate VLAN for easier network
administration and troubleshooting.
Dynamic Trunking Protocol (DTP) enables dynamic trunk configuration across all ports on the switch.
Port Aggregation Protocol (PAgP) automates the creation of Cisco Fast EtherChannel
enabling linking to another switch, router, or server.
Link Aggregation Control Protocol (LACP) allows the creation of Ethernet channeling with devices that conform to
IEEE 802.3ad. This is similar to Cisco's EtherChannel and PAgP.
IEEE 802.3z-compliant 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-ZX, and 1000BASE-T physical interface
support through a field-replaceable GBIC module provides customers with unprecedented flexibility in switch
deployment.
The default configuration stored in Flash helps to ensure that the switch can be quickly connected to the network and can
pass traffic with minimal user intervention.
The switches support nonstandard Ethernet frame sizes (mini-giants) up to 1542 bytes (configurations with GBIC ports
only).
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
© 2004 Cisco Systems, Inc. All rights reserved.
Page 10 of 18
®
or Gigabit EtherChannel groups,