Cisco 300 Series Fiche technique - Page 6

Parcourez en ligne ou téléchargez le pdf Fiche technique pour {nom_de_la_catégorie} Cisco 300 Series. Cisco 300 Series 14 pages. Managed switches
Également pour Cisco 300 Series : Manuel de démarrage rapide (18 pages), Manuel de démarrage rapide (17 pages), Manuel de démarrage rapide (17 pages)

Imprimer la page
Cisco 300 Series Fiche technique
Feature
Layer 3
IPv4 routing
Classless Inter-Domain Routing (CIDR) Support for CIDR
DHCP relay at Layer 3
User Datagram Protocol (UDP) relay
Security
Secure Shell (SSH) Protocol
Secure Sockets Layer (SSL)
IEEE 802.1X
(Authenticator role)
Layer 3 isolation*
Layer 2 isolation Private VLAN Edge
(PVE) with community VLAN
Port security
RADIUS/TACACS+
Storm control
DoS prevention
Congestion avoidance
ACLs
Quality of Service
Priority levels
Scheduling
Class of service
Rate limiting
Standards
Standards
© 2008–2010 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Description
Wirespeed routing of IPv4 packets
Up to 32 static routes and up to 32 IP interfaces
Relay of DHCP traffic across IP domains
Relay of broadcast information across Layer 3 domains for application discovery or relaying of BootP/DHCP
packets
SSH secures Telnet traffic to and from the switch; SSH v1 and v2 are supported
SSL support: Encrypts all HTTPS traffic, allowing highly secure access to the browser-based management
GUI in the switch
802.1X: RADIUS authentication and accounting, MD5 hash; guest VLAN; unauthenticated VLAN,
single/multiple host mode and single/multiple sessions
Supports time-based 802.1X
Dynamic VLAN assignment
Allow/disallow routing between IP subnets or directly connected IP networks
PVE (also known as protected ports) provides Layer 2 isolation between devices in the same VLAN,
supports multiple uplinks
Locks MAC addresses to ports, and limits the number of learned MAC addresses
Supports RADIUS and TACACS authentication. Switch functions as a client
Broadcast, multicast, and unknown unicast
DoS attack prevention
A TCP congestion avoidance algorithm is required to minimize and prevent global TCP loss synchronization.
Support for up to 512 rules
Drop or rate limit based on source and destination MAC, VLAN ID or IP address, protocol, port, differentiated
services code point (DSCP)/IP precedence, TCP/ UDP source and destination ports, 802.1p priority,
Ethernet type, Internet Control Message Protocol (ICMP) packets, IGMP packets, TCP flag
4 hardware queues
Strict priority and weighted round-robin (WRR)
Queue assignment based on DSCP and class of service (802.1p/CoS)
Port based; 802.1p VLAN priority based; IPv4/v6 IP precedence/type of service (ToS)/DSCP based;
Differentiated Services (DiffServ); classification and re-marking ACLs, trusted QoS
Ingress policer; egress shaping and rate control; per VLAN, per port, and flow based
IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T
Gigabit Ethernet, IEEE 802.3ad LACP, IEEE 802.3z Gigabit Ethernet, IEEE 802.3x Flow Control, IEEE
802.1D (STP, GARP, and GVRP),IEEE 802.1Q/p VLAN, IEEE 802.1w RSTP, IEEE 802.1s Multiple STP,
IEEE 802.1X Port Access Authentication, IEEE 802.3af, IEEE 802.3at, RFC 768, RFC 783, RFC 791,
RFC 792, RFC 793, RFC 813, RFC 879, RFC 896, RFC 826, RFC 854, RFC 855, RFC 856, RFC 858,
RFC 894, RFC 919, RFC 922, RFC 920, RFC 950, RFC 951, RFC 1042, RFC 1071, RFC 1123, RFC
1141, RFC 1155, RFC 1157, RFC 1350, RFC 1533, RFC 1541, RFC 1542, RFC 1624, RFC 1700, RFC
1867, RFC 2030, RFC 2616, RFC 2131, RFC 2132, RFC 3164, RFC 3411, RFC 3412, RFC 3413, RFC
3414, RFC 3415, RFC 2576, RFC 4330, RFC 1213, RFC 1215, RFC 1286, RFC 1442, RFC 1451, RFC
1493, RFC 1573, RFC 1643, RFC 1757, RFC 1907, RFC 2011, RFC 2012, RFC 2013, RFC 2233, RFC
2618, RFC 2665, RFC 2666, RFC 2674, RFC 2737, RFC 2819, RFC 2863, RFC 1157, RFC 1493, RFC
1215, RFC 3416
Data Sheet
Page 6 of 14