Cisco 3020 - Cisco Catalyst Blade Switch Manuel de démarrage - Page 21

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage pour {nom_de_la_catégorie} Cisco 3020 - Cisco Catalyst Blade Switch. Cisco 3020 - Cisco Catalyst Blade Switch 37 pages. Release notes for the cisco catalyst blade switch 3020 for hp, ciscoã‚â iosã‚â releaseã‚â 12.2(44)se
Également pour Cisco 3020 - Cisco Catalyst Blade Switch : Manuel de démarrage (31 pages), Quickspecs (12 pages), Note de mise à jour (41 pages), Note de mise à jour (27 pages), Note de mise à jour (23 pages), Note de mise à jour (21 pages), Manuel d'installation (21 pages)

Imprimer la page
Cisco 3020 - Cisco Catalyst Blade Switch Manuel de démarrage
No parity
–
1 stop bit
–
No flow control
–
4. Use the CLI to enter commands to configure the switch module. See the software configuration
guide and the command reference for more information.

Other Management Options

You can use SNMP management applications such as CiscoWorks Small Network Management
Solution (SNMS) to configure and manage the switch module. You also can manage it from an
SNMP-compatible workstation that is running platforms such as HP OpenView or SunNet Manager.
The Cisco IE2100 Series Configuration Registrar is a network management device that works with
embedded Cisco Networking Services (CNS) agents in the switch module software. You can use
IE2100 to automate initial configurations and configuration updates on the switch module.
See the "Accessing Help Online" section on page 23 for a list of supporting documentation.
Onboard Administrator Command-Line Interface
See the HP BladeSystem enclosure setup and installation guide at
http://www.hp.com/go/bladesystem/documentation
Administration CLI.
7

In Case of Difficulty

If you experience difficulty, help is available in this section and also on Cisco.com. This section
includes Express Setup troubleshooting, how to reset the switch module, how to access online help,
and where to find more information.
for information on how to use the Onboard
21