Byetta Pen 10 Manuel de l'utilisateur - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Byetta Pen 10. Byetta Pen 10 11 pages. 10 micrograms solution for injection in pre-filled pen (exenatide)

Imprimer la page

User manual



Wash hands prior to use.



Check pen label to make sure it is your 10 microgram pen.



Pull off the blue pen cap.



Check Byetta in the cartridge.



The liquid should be clear, colourless, and free of particles. If it is not, do not use.

Note: A small air bubble will not harm you or affect your dose.

STEP 2 Attach the Needle



Remove paper tab from outer needle shield.



Push outer needle shield containing the needle straight onto the pen, then screw needle on until

secure.



Pull off outer needle shield. Do not throw away. The outer needle shield will be used when you

are removing the needle from the pen after the injection.



Pull off inner needle shield and throw away. A small drop of liquid may appear. This is normal.

Note: If the needle is not secure, you may not get your full dose.

STEP 3 Dial the Dose