Cisco 3750 - Catalyst EMI Switch Manuel de démarrage - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage pour {nom_de_la_catégorie} Cisco 3750 - Catalyst EMI Switch. Cisco 3750 - Catalyst EMI Switch 27 pages. Catalyst 3750 series switches
Également pour Cisco 3750 - Catalyst EMI Switch : Fiche technique (18 pages), Manuels d'installation (47 pages), Faq (10 pages), Bulletin d'information sur les produits (5 pages), Bulletin d'information sur les produits (6 pages), Aperçu du produit (25 pages), Description (1 pages), Fiche technique (23 pages), Bulletin d'information sur les produits (6 pages), Fiche technique (23 pages), Manuel de démarrage (33 pages)

After you complete Express Setup, you should refresh the PC IP address:

• For a dynamically assigned IP address, disconnect the PC from the switch, and reconnect the PC

to the network. The network DHCP server assigns a new IP address to the PC.

• For a statically assigned IP address, change it to the previously configured IP address.

Managing the Switch

After you complete Express Setup and install the switch in your network, use the device manager or

other management options described in this section for further configuration.

The simplest way to manage the switch is by using the device manager that is in the switch memory.

This is an easy-to-use web interface that offers quick configuration and monitoring. You can access

the device manager from anywhere in your network through a web browser.

Follow these steps:

1. Launch a web browser on your PC or workstation.

2. Enter the switch IP address in the web browser, and press Enter. The device manager page appears.

3. Use the device manager to perform basic switch configuration and monitoring. Refer to the device

manager online help for more information.

4. For more advanced configuration, download and run the Cisco Network Assistant, which is

described in the next section.

Cisco Network Assistant is a software program that you download from Cisco.com and run on

your PC. It offers advanced options for configuring and monitoring multiple devices, including

switches, switch clusters, switch stacks, routers, and access points. Network Assistant is free—there is

no charge to download, install, or use it.

Follow these steps:

1. Go to this Web address: http://www.cisco.com/go/NetworkAssistant.

You must be a registered Cisco.com user, but you need no other access privileges.

2. Find the Network Assistant installer.