Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Note d'installation - Page 21

Parcourez en ligne ou téléchargez le pdf Note d'installation pour {nom_de_la_catégorie} Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion. Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion 46 pages. Distributed forwarding card 4 for ws-x68xx, ws-x69xx, and select ws-x67xx modules
Également pour Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion : Note d'installation (14 pages), Manuel de solution (17 pages), Livre blanc (19 pages), Description (1 pages), Bulletin d'information sur les produits (6 pages), Avis (4 pages), Fiche technique (9 pages), Fiche technique (18 pages), Livre blanc (18 pages), Manuel de configuration (8 pages), Note d'installation (28 pages), Manuel de dépannage (11 pages), Note d'installation (18 pages), Manuel de l'utilisateur (17 pages), Note d'installation (24 pages), Manuel (19 pages), Note d'installation (36 pages)

Release the two spring clips on either side of the memory module to release it from the socket. (See

Step 3

Figure

Figure 11

Grasp the edges of the memory module with your thumb and forefinger, and gently pull the memory

Step 4

module completely out of the socket.

Memory modules are sensitive components that are susceptible to ESD damage. To prevent ESD

Caution

damage, handle the memory module by the edges only; avoid touching the memory chips, pins, or traces

(the metal fingers along the connector edge of the memory module). (See

78-15893-08

11.)

Releasing the Memory Module Spring Clips

Memory module

Catalyst 6500 Series Distributed Forwarding Card 3 for WS-X67xx Modules Installation Note

Pull the tabs away with

your thumbs, bracing your

forefingers against the

rails. The memory module

will be released. Then raise

the memory module to

a vertical position.

Upgrading the Ethernet Module Memory

Figure

12.)