Cisco 7507 Manuel de démarrage rapide - Page 18

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Cisco 7507. Cisco 7507 44 pages. Air filter and chassis blower replacement
Également pour Cisco 7507 : Manuel d'instructions d'installation (39 pages), Fiche technique (11 pages), Manuel d'instructions de remplacement (21 pages)

Imprimer la page

Connect the RSP

Connect the Console and the Auxiliary Y-Cables

sole terminal

The console and auxiliary Y-cables allow you to

simultaneously connect the console or auxiliary

ports on two RSP2s, RSP4s, or RSP8s, to a single

console terminal, or external auxiliary device. These

are conﬁgured as system master and slave in slots 2

and 3 in the Cisco 7507.

Step 1

Connect the DB-25 female end of the

Y-cable to the console terminal device.

Step 2

Connect one DB-25 male end of the

Y-cable to an RSP or other external

auxiliary device.

Step 3

Repeat Step 2 for the other RSP or other

external device.

DB-25

Console

external

to cons

y equipment

RSPs in

DB-25

Step 1

Connect the DB-25 male end of the

Y-cable to the external auxiliary

equipment.

Step 2

Connect one DB-25 female end of the

Y-cable to auxiliary ports on an RSP in an

RSP slot.

Step 3

Repeat Step 2 for the auxiliary ports on a

second RSP in an RSP slot.

Step 4

Connect the interface processors or VIPs

to the external network. Refer to the

appropriate processor module manual,

such as the Route Switch Processor

(RSP4/4+) Installation and Conﬁguration

Guide.

DB-25 fe

Auxiliary

to auxili

RSPs in

DB-25 fe