Cisco 8800 Series Manuel - Page 12

Connect with Activation Code Onboarding

Procedure

Step 1

Press Applications

Step 2

Select Admin settings.

Step 3

Select one of the following menu items:

• All phones connected to the Ethernet: Ethernet setup

• Cisco IP Phone 8861 and 8865 users that use Wi-Fi: Network setup > Wi-Fi client setup

Step 4

Select IPv4 Setup.

Step 5

Navigate to Alternate TFTP and choose On.

Step 6

Select TFTP server 1.

Step 7

Enter your TFTP server address in the TFTP server 1 field.

Step 8

Press Apply.

Step 9

Press Continue.

Step 10

Press Exit.

Connect with Activation Code Onboarding

If your network has been configured to support this feature, then you can use Activation Code Onboarding

to connect to your company's phone network.

Enter an Activation Code

Activation codes are used to set up your new phone. They can only be used once, and expire after 1 week.

Contact your administrator if you don't know your code or if you need a new one.

Procedure

Step 1

Enter your activation code on the activation screen.

Step 2

Press Submit.

Activate Your Phone with a QR Code

If your phone has a camera, you can scan a QR code to activate the phone. If you inadvertently press Enter

manually, press Back

Before you begin

You need the QR code for your phone. If you are assigned to a phone, then the code is available on the Self

Care Portal. But your administrator may have blocked you from viewing this information.

Codes are valid for up to 1 week by default, and have an expiry date near the bottom of the graphic. If the

code has expired or if you need a code, then contact your administrator.

Your Phone

to return to the QR code screen.

Your Phone