DigiPos PH-6000B Manuel de l'utilisateur - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} DigiPos PH-6000B. DigiPos PH-6000B 15 pages. Pos system

Connecting USB Powered Devices

The DigiPoS PH-6000B provides a wide range of output voltages from its PoweredUSB

ports: 5V, 12V, and 24V. These ports allow the connected devices to be powered directly

from your DigiPoS PH-6000B. You can also use these ports for standard USB data

transmission.

Note: To find out the required voltage of the USB peripheral device to be connected,

please refer to the device's manual or contact your peripheral device dealer.

Using the 5V PoweredUSB port

The 5V PoweredUSB port (black or orange

connector) is located on the front of your DigiPoS

PH-6000B. This port allows you to connect a low

power device, such as a CCD barcode scanner.

Using the 12V PoweredUSB port

The 12V PoweredUSB port (blue connector) is

located on the rear side of your DigiPoS PH-

6000B. By using the 12V PoweredUSB port, you

can connect equipment, such as VFDs (Vacuum

Fluorescent Display) and customer displays,

Connect one end of the 12V USB powered cable

to the 12V PoweredUSB port (blue connector) on

the DigiPoS PH-6000B. Connect the two

connectors at the other end to a 12V device.

Note: A 12V USB powered cable is required for

this connection. If you need to purchase one,

please contact your vendor.

Making Connections

DigiPoS

24V DC

INPUT

24V

12V