Cisco 9124 - mds multilayer fabric switch Spécifications - Page 2

Parcourez en ligne ou téléchargez le pdf Spécifications pour {nom_de_la_catégorie} Cisco 9124 - mds multilayer fabric switch. Cisco 9124 - mds multilayer fabric switch 2 pages. Mds 9000 series
Également pour Cisco 9124 - mds multilayer fabric switch : Fiche technique (9 pages), Spécifications (3 pages), Manuel de configuration (49 pages), Note de mise à jour (48 pages), Note de mise à jour (44 pages), Note de mise à jour (36 pages), Note de mise à jour (22 pages), Note de mise à jour (3 pages), Note de mise à jour (40 pages), Manuel (16 pages), Manuel d'installation du matériel (36 pages)

Imprimer la page
Cisco 9124 - mds multilayer fabric switch Spécifications
Cisco MDS 9124 24-Port Multilayer Fabric Switch

Product Specifications

Product
Specifications
Software
Cisco MDS 9000 SAN-OS Software Release 3.1.(1) or later
Compatibility
Cisco MDS 9000 NX-OS Software Release 4.1(1) or later
Ports
24 fixed auto-sensing 4/2/1-Gbps Fibre Channel ports
Base Switch will have 8 ports active. Additional 8 ports can be activated on demand using the
8-port license. Two 8-port licenses will activate all 24 ports.
* SFP's sold separately
•
Performance
Port speed:
4/2/1-Gbps auto-sensing, optionally configurable
•
Buffer credits:
16 per port
•
Ports per chassis:
Twenty-four 4-, 2-, 1-Gbps Fibre Channel ports
•
Supported optics, media, and transmission distances:
Optics
•
4 Gbps—SW, LC SFP
•
4 Gbps—SW, LC SFP
•
4 Gbps—LW, LC SFP
* Initial configuration can be set for SW, LW or a mix of both
•
Network
Out-of-band 10/100 Ethernet port, RS-232 serial console port with DB-9
Access methods:
•
Management
Access protocols:
CLI through console and Ethernet ports, SNMPv2 through Ethernet
•
SSHv2 Protocol v2 and SNMPv2
Network security:
•
Management applications:
Manager
•
Power
Integral power supply
•
AC input characteristics: 100 to 240 VAC (10% range), 50 to 60 Hz (nominal), 300W
•
DC Input characteristics: 8A @ -48 to -60V, 300W
•
Power Consumption: 80W
•
Optional dual power supply capability
* Detailed product specification can be obtained from the Cisco MDS 9124 data sheet.
* SFP's sold separately—initial configuration can be set for SW, LW or a mix of both.
Copyright © 2009 Cisco Systems, Inc. All rights reserved. Cisco, Cisco IOS, Cisco Systems, and the Cisco Systems logo are registered trademarks or trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.
Media
Distance
•
•
50/125 micron multimode
150m
•
•
62.5/125 micron multimode
70m
•
•
9/125 micron single-mode
10 km
Cisco MDS 9124 CLI, Cisco Fabric Manager, Cisco Device

Ordering Information

Product Description
Cisco MDS 9124 24-Port Multilayer Fabric Switch
Cisco MDS 9124 24-Port Multilayer Fabric Switch with one DC Power Supply
Cisco MDS 9124 On-Demand Ports (8), 4-Gbps Activation License
Electronic Delivery version of Cisco MDS 9124 On-Demand Ports (8),
4-Gbps Activation License
Optional Redundant Power Supply (AC)
Optional Redundant Power Supply (DC)
Small Form-Factor Pluggable (SFP) Optics Options
Cisco MDS 9000 4/2/1-Gbps Fibre Channel—SW, SFP, LC
Cisco MDS 9000 4/2/1-Gbps Fibre Channel—LW, SFP, LC
Spare Components
Cisco MDS 9000 4/2/1-Gbps Fibre Channel—SW, SFP, LC, Spare
Cisco MDS 9000 4/2/1-Gbps Fibre Channel—LW, SFP, LC, Spare

For More Information

For more information about the Cisco MDS 9124, visit
contact your local account representative.
At-A-Glance
Part Number
•
DS-C9124-K9
•
DS-C9124DC-K9
•
M9124PL8-4G
•
M9124PL8-4G=
•
L-M9124PL8-4G=
•
DS-C24-300AC=
•
PWR-C49-300DC=
•
DS-SFP-FC4G-SW
•
DS-SFP-FC4G-LW
•
DS-SFP-FC4G-SW=
•
DS-SFP-FC4G-LW=
http://www.cisco.com/go/9124
or
C45-372768-03 02/09