Cisco Aironet 1000 Series Manuel de déploiement - Page 20

Parcourez en ligne ou téléchargez le pdf Manuel de déploiement pour {nom_de_la_catégorie} Cisco Aironet 1000 Series. Cisco Aironet 1000 Series 40 pages. Install and upgrade internal modules and field replaceable units
Également pour Cisco Aironet 1000 Series : Manuel (20 pages), Mise à niveau (28 pages)

Imprimer la page
Cisco Aironet 1000 Series Manuel de déploiement

Determining Deployment Requirements

Determining Deployment Requirements
There are a few important deployment criteria to consider when deploying a wireless network:
•
•
•
•
•
•
•
Most enterprise installations are initially designed and deployed for coverage. If there is a large installed
Note
base of wireless clients, capacity must also be considered.

Assumptions

The guidelines in this document are written based on the following conditions and assumptions:
•
•
•
•
•
These assumptions are typical for available 802.11 client data terminals and typical cubicle density.
Note
Deployment Guide: Cisco Aironet 1000 Series Lightweight Access Points
2
Assumptions
Protocol Requirements
Coverage Area Requirements
Building Type
Building Homogeneity
Average Client Throughput
Voice over IP Requirements
Client Data Terminal Transmit (Tx) Power: >=15 dBm.
Client Data Terminal Antenna Gain: >=0 dBi.
Capacity: up to 15 Data client Terminals or up to 14 VoIP clients per Cisco 1000 series lightweight
access point.
Handover Times: 37 milliseconds or less for Layer 2 (same- Cisco 4100 Series Wireless LAN
Controller) handovers, 48 milliseconds or less for Layer 3 (inter-Cisco 4100 Series Wireless LAN
Controller and inter-subnet) handovers.
Quality of Service: Assigned on a per-WLAN basis. VoIP clients with Platinum QoS take
precedence (up to 90+% of bandwidth) over clients with Gold, Silver or Bronze QoS.
Deployment
78-17279-01