Cisco AJ732A - MDS 9134 Fabric Switch Manuel de configuration - Page 46

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Cisco AJ732A - MDS 9134 Fabric Switch. Cisco AJ732A - MDS 9134 Fabric Switch 49 pages. Converged network switches for nx-os 4.0(1a)n1(1)
Également pour Cisco AJ732A - MDS 9134 Fabric Switch : Note de mise à jour (48 pages), Note de mise à jour (44 pages), Note de mise à jour (44 pages), Note de mise à jour (36 pages), Note de mise à jour (26 pages), Note de mise à jour (22 pages), Manuel de référence rapide (14 pages), Note de mise à jour (3 pages)

(XConnects) (ports 17 and 18) and to ensure all ports are in the same VLAN. For information on the BBI

see the HP ProLiant BL p-Class GbE2 Interconnect Switch Browser-based Interface Reference Guide.

Disabling the cross connection ports

With XConnects between Interconnect A and Interconnect B, the multi-path solution may use loops

established at the interconnect switching level. To avoid this disable the XConnects. Each interconnect

model has different XConnect ports. Some interconnects don't enable these ports by default. The

following procedure uses the GbE2. See the interconnect documentation for more information.

Click the CONFIGURE tab on the BBI main window

Figure 43 BBI main window

Click the folder icon next to p-Class GbE2 Switch.

Navigate to the Switch Ports icon in the Switch folder

Figure 44 Switch Ports icon location

Disable Switch Port State for ports 17 and 18

(Figure

43).

(Figure

44).

(Figure

45).