Cisco Business 250 Series Manuel de démarrage rapide - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Cisco Business 250 Series. Cisco Business 250 Series 49 pages. Smart switches
Également pour Cisco Business 250 Series : Manuel de démarrage rapide (2 pages), Manuels de démarrage rapide (5 pages), Connaître (10 pages), Manuel de démarrage rapide (17 pages), Connaître (16 pages), Manuel de démarrage rapide (5 pages)

–

Shaft diameter: 3.5 x 1.3 mm

• Computer with Microsoft Internet Explorer (version 9.0, 10.0, 11.0),

Mozilla Firefox (version 51.0, 52.0, 53.0), or higher, or Google Chrome

(version 56, 57, 58, or higher) for using the web-based interface.

Mounting the Cisco 250 Series Smart

Switches

There are three ways to install the switch:

• Place the switch on a flat surface. To place the switch on a desktop,

install the four rubber feet (included) on the bottom of the switch.

• Mount the switch in a standard rack (1 rack unit high).

• Mount on a wall.

Placement Tips

Do not mount the device in a location where any of the following conditions

exist:

• High Ambient Temperature—To prevent the switch from overheating,

do not operate it in an area that exceeds an ambient temperature of

122°F (50°C).

• Air Flow—Both side panels must be unobstructed to prevent

overheating.

• Overloading—The device must be level, stable, and secure to prevent

it from sliding or shifting out-of-position.

• Circuit Overloading—Adding the device to the power outlet must not

overload that circuit.

You can mount the switches in any standard size, 19-inch (about 48 cm)

wide rack. The switch requires 1 rack unit (RU) of space, which is 1.75

inches (44.45 mm) high.

For stability, load the rack from the bottom to the top, with the

AUTION

heaviest devices on the bottom. A top-heavy rack is likely to

be unstable and might tip over.

Cisco 250 Series Smart Switches