Accustic Arts POWER I you Manuel - Page 12
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Accustic Arts POWER I you. Accustic Arts POWER I you 13 pages.
Imprimer la pageCause 3
Short circuit at speaker outlet.
Solution
Check the loudspeaker terminals an correct it if necessary
Cause 4
INPUT 5 is used as SURROUND BYPASS and a wrong unit is connected.
Solution
Disconnect the unit.
Malfunction
Crackling or humming in the loudspeaker
Cause
Contact problems on the input sockets or on the loudspeaker terminals.
Solution
Switch off the unit and check the contact on the input sockets and on the loudspeaker
terminals.
Malfunction
The volume control does not react to the remote control.
Cause 1
The remote control transmitter does not send the right signal.
Solution
Check batteries and change if necessary.
Cause 2
The infrared receiver cannot receive the transmitted signal.
Solution
Always point the remote control transmitter directly towards the receiver diode and
remove any barriers which might possibly interfere.
IMPORTANT!
In the event that the device does not function properly after an electrostatic
discharge, please switch off the device and turn it on again after a few seconds
For malfunctions which affect the reproduction of individual devices first of all make sure that all
connections are correctly and thoroughly carried out. In general errors which arise are often a result
of an unsatisfactory or wrongly made connection.
10. Specifications (selection)
Inputs:
Headphones output:
Output:
Signal difference left/right: < 0.4 dB (from 0 dB to -40 dB)
Input resistance:
Total transformer power:
Rated power output:
(at THD+N = 0.1 %)
Distortion (THD+N):
Signal-to-noise-ratio:
(A weighted)
Damping factor:
Dimensions:
Weight:
2 x balanced high level inputs (XLR)
3 x unbalanced high level inputs (RCA)
1 x unbalanced as high level input or
1 x metal female jack 6.3 mm; < 25 >300
1 x unbalanced pre-output (RCA); 47
balanced: 2 x 47 k
unbalanced: 47 k
max. 500 VA (watts)
2 x 260 watts on 4
2 x 175 watts on 8
0.015 % on 4 load with 1 kHz and 10 watts
0.015 % on 8 load with 1 kHz and 10 watts
>100 dBA (ref. 6.325 V)
> 100 on 8 load with 1 kHz
145 x 482 x 450 mm (H x W x D)
5.7 x 19.0 x 17.7 inches (H x W x D)
approx. 21 kg / 48 lbs.
-
13