Cisco C-series Nexus 5020 Manuel d'installation du matériel - Page 17
Parcourez en ligne ou téléchargez le pdf Manuel d'installation du matériel pour {nom_de_la_catégorie} Cisco C-series Nexus 5020. Cisco C-series Nexus 5020 19 pages. Replacing an i/o module nexus 5000 series
Également pour Cisco C-series Nexus 5020 : Spécifications (3 pages), Fiche technique (23 pages), Note de mise à jour (26 pages), Note de mise à jour (3 pages), Manuel (11 pages)
Imprimer la page
Chapter 4
Replacing Components
If you purchased this product through a Cisco reseller, contact the reseller directly for technical support.
Note
If you purchased this product directly from Cisco, contact Cisco Technical Support at this URL:
http://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html.
Removing the Cisco Nexus 5500 Platform Chassis or the Cisco
Nexus 5000 Platform Chassis
The slider rail and front rack-mount brackets do not have a stop mechanism when sliding in and out. If
Caution
the front of the chassis is unfastened from the rack and the chassis slides forward on the slider rails, it
might slip off the end of the rails and fall out of the rack.
To remove the Cisco Nexus 5500 Platform chassis or the Cisco Nexus 5000 Platform chassis from a rack,
follow these steps:
Ensure that the weight of the switch is fully supported and that the switch is being held by another
Step 1
person.
Disconnect the power cord and the console cables.
Step 2
Disconnect all cables that are connected to SFP+ transceivers.
Step 3
Remove the screws fastening the front rack-mount brackets to the mounting rails.
Step 4
Gently slide the switch towards you, off of the slider rails and out of the rack.
Step 5
Repacking Cisco Nexus 5500 Platform Switch Components or
Cisco Nexus 5000 Platform Switch Components for Return
Shipment
If you need to return the switch, remove the switch from the rack by following the steps in the
"Removing the Cisco Nexus 5500 Platform Chassis or the Cisco Nexus 5000 Platform Chassis" section
on page
repack the switch. Contact your Cisco customer service representative to arrange for return shipment to
Cisco.
Removing the Cisco Nexus 5500 Platform Chassis or the Cisco Nexus 5000 Platform Chassis
4-17, and repack it for shipment. If possible, use the original packing materials and container to
Cisco Nexus 5000 Series Hardware Installation Guide
4-17