Cisco Catalyst 2360 Manuel de démarrage - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage pour {nom_de_la_catégorie} Cisco Catalyst 2360. Cisco Catalyst 2360 21 pages.

Imprimer la page

Running Express Setup

Step 7

Enter the required settings in the Express Setup window.

Note

Required Fields

Enter this information in the Network Settings fields:

In the Management Interface (VLAN ID) field, the default is 1.

•

Note

Enter a new VLAN ID only if you want to change the management interface through which you

manage the switch. The VLAN ID range is 1 to 1001.

In the IP Address field, enter the IP address of the switch.

•

In the Subnet Mask field, click the drop-down arrow, and select a subnet mask.

•

In the Default Gateway field, enter the IP address for the default gateway (router).

•

Enter your password in the Switch Password field. The password can be from 1 to 25 alphanumeric

•

characters, can start with a number, is case sensitive, allows embedded spaces, but does not allow

spaces at the beginning or end. In the Confirm Switch Password field, enter your password again.

Note

Optional Fields

You can enter other administrative settings in the Express Setup window. For example, the optional

administrative settings identify and synchronize the switch for enhanced management. The switch

clock is automatically synchronized with the network clock by using NTP. You can manually set the

system clock settings if the switch should have different time settings.

Click Submit to save your changes and to complete the initial setup.

For more information about the Express Setup fields, see the online help for the Express Setup window.

Step 8

After you click Submit, these events occur:

The switch is configured and exits Express Setup mode.

•

The browser displays a warning message and tries to connect with the earlier switch IP address.

•

Typically, connectivity between the PC and the switch is lost because the configured switch IP

address is in a different subnet from the IP address on the PC.

Step 9

Disconnect the switch from the PC, and install the switch in your network. See the

section on page

Catalyst 2360 Switch Getting Started Guide

All text entries must be in English letters.

We recommend using the default VLAN value because during express setup, VLAN 1 is the

only VLAN on the switch.

You must change the password from the default password, cisco.

12.

"Rack-Mounting"

OL-22149-02