Cisco Catalyst 2900 Series XL Manuel de démarrage rapide - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Cisco Catalyst 2900 Series XL. Cisco Catalyst 2900 Series XL 13 pages. 10/100 autosensing fast ethernet switches
Également pour Cisco Catalyst 2900 Series XL : Manuel de démarrage rapide (12 pages), Vue d'ensemble (6 pages)
Imprimer la page
4
Click General. In the Temporary Internet
Files section, click Settings. The Settings
window opens.
5
Select Every visit to the page, and click
OK.
6
In the Internet Options window, click
Security.
7
In the Zone drop-down list, select Trusted
Sites Zone, and click Custom.
8
Click Settings.
9
In the Java>Java permissions section,
select Custom. Click the Java Custom
Setting, which appears at the bottom of
the window.
10
In the Trusted Sites Zone window, click
Edit Permissions.
11
If the buttons under Run Unsigned
Content are not available, select either
Medium or Low security in the Reset Java
Permissions list box. Click Reset.
12
Under Run Unsigned Content, select
Enable, and click OK.
13
In the Security Settings window, click OK.
14
In the Internet Options window, click
Security. Verify that the Zone
drop-down list is set to Trusted Sites
Zone.
15
In the Trusted Sites Zone section, click
Add Sites.
16
In the Trusted Sites Zone window,
deselect the Require server verification
check box.
17
In the Add this Web site to the Zone
field, enter the IP address of the switch.
18
Click Add, and then click OK.
Note: If the switch will be a member of a
cluster, you can enter the address of the
cluster command switch. Refer to the Cisco
IOS Desktop Switching Software
Configuration Guide for more information.
19
In the Internet Options window, click
Apply, and then click OK.
Display CVSM
Once the browser is configured, display the
CVSM as follows:
1
Enter the IP address of the switch in the
Location field (the Address field if you
are using Internet Explorer).
Note: You can cut and paste the switch IP
address from the window that you use to
complete the setup program.
7