Cisco Catalyst 2960-CX Manuel - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Cisco Catalyst 2960-CX. Cisco Catalyst 2960-CX 24 pages.
Également pour Cisco Catalyst 2960-CX : Aperçu du produit (15 pages)

Imprimer la page

Managing Switch Stacks

Connectivity to the Switch Stack Through Console Ports

You can connect to the stack master by connecting a terminal or a PC to the stack master through the console

port of one or more stack members.

Be careful when using multiple CLI sessions to the stack master. Commands that you enter in one session are

not displayed in the other sessions. Therefore, it is possible that you might not be able to identify the session

from which you entered a command.

We recommend using only one CLI session when managing the switch stack.

How to Configure a Switch Stack

Configuring a Network Port as Stack Port

You can configure both 10G network ports and multigig ports as stack ports or configure one port as stack

port and retain another port as network port.

Procedure

Step 1

Step 2

Step 3

Step 4

Step 5

Command or Action

enable

Example:

Switch> enable

configure terminal

Example:

Switch# configure terminal

switch switch-number hstack-port stack-port

Example:

Switch(config)# switch 1 hstack-port 1

TenGigabitEthernet 1/0/1

end

Example:

Switch(config)# end

show switch horizontal-stack-ports

Example:

Connectivity to the Switch Stack Through Console Ports

Purpose

Enables privileged EXEC mode.

• Enter your password if prompted.

Enters global configuration mode.

Configures the network port into a stack port .

After configuration, restart the

Note

switch for network port to become a

stack port.

Returns to privileged EXEC mode.

Verifies the operation status of network ports

and stack ports.

Managing Switch Stacks