DigiSender Plug'n'Go DX2000-LCD Manuel de l'utilisateur - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} DigiSender Plug'n'Go DX2000-LCD. DigiSender Plug'n'Go DX2000-LCD 16 pages. 5.8ghz single input ‘plug style’ wireless av sender

Imprimer la page

DX2000-LCD - DigiSender® Plug'n'Go™ LCD

Troubleshooting

Audio Problems

Q: What seems to

be the problem

with the sound?

Page 12

I can see the picture but

can't hear anything.

The sound is distorted.

There is a buzzing sound

present. It seems to get

worse during on-screen

menus or bright pictures.

There is a hissing sound

and the volume must be

turned up high on the sec-

ond TV to hear anything.

Please read this instruction manual carefully prior to installation

1. Disconnect both the Transmitter

AND Receiver SCART cables. Recon-

nect the cables ensuring they are

pushed into the sockets firmly.

2. If you are using a home cinema

DVD player with surround sound,

please ensure the analogue audio

output on SCART is switched on.

Turn down the volume on your source

device (Satellite, Cable, Freeview,

DVD or VCR).

Try changing the Contrast setting on

your source device.

1. Turn the output volume UP (if pos-

sible) on your source device (Satellite,

Cable, Freeview, DVD or VCR).

2. Ensure the Transmitter and Re-

ceiver are within the usable range

(40m avg).

3. Switch off your microwave oven if

present.