FIBARO FGDW-002-2 Manuel d'utilisation - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} FIBARO FGDW-002-2. FIBARO FGDW-002-2 16 pages. Door/window sensor

Imprimer la page

NOTE

It is possible to in-

stall the device with

screws (not included).

We recommend using

2.5mm x 16mm coun-

tersunk head screws

with 5mm head diam-

eter. The magnet still

has to be stuck on.

PHySICAL InSTALLATIOn

#4: Physical installation

To install the Door/Window Sensor:

1. Peel off the protective layer from the sticker on the device.

2. Stick the device onto the door/window frame.

3. Peel off the protective layer from the sticker on the magnet.

4. Stick the magnet onto the moving part of the door/window, no

further than 5mm from the sensor.

Positioning of the Sensor and the magnet:

Correct positioning of the magnet in relation to the Sensor:

(vertical line marks should align)

max. 5 mm