Sharp 220H Manuel d'utilisation - Page 18

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sharp 220H. Sharp 220H 24 pages. Sharp m i c r o wav e o v e n operation manual

Imprimer la page

C L E A N I N G A N D C A R E

Disconnect the power cord before cleaning or

leave the door open to inactivate the oven dur-

ing cleaning.

Exterior

The outside surface is painted. Clean the outside with

mild soap and water; rinse and dry with a soft cloth. Do

not use any type of household or abrasive cleaner.

Door

Wipe the window on both sides with a damp cloth to

remove any spills or spatters. Metal parts will be easier

to maintain if wiped frequently with a damp cloth. Avoid

the use of spray and other harsh cleaners as they may

stain, streak or dull the door surface.

Touch Control Panel

Wipe the panel with a cloth dampened slightly with water

only. Dry with a soft cloth. Do not scrub or use any sort

of chemical cleaners. Close door and touch STOP/

CLEAR pad.

Interior

Cleaning is easy because little heat is generated to the

interior surfaces; therefore, there is no baking and setting

of spills or spattering. To clean the interior surfaces, wipe

with a soft cloth and warm water. DO NOT USE ABRA-

SIVE OR HARSH CLEANERS OR SCOURING PADS. For

heavier soil, use baking soda or a mild soap; rinse thor-

oughly with hot water. NEVER SPRAY OVEN CLEANERS

DIRECTLY ONTO ANY PART OF THE OVEN.

Waveguide Cover

The waveguide cover is made from mica so requires

special care. Keep the waveguide cover clean to as-

sure good oven performance. Carefully wipe with a

damp cloth any food spatters from the surface of the

cover immediately after they occur. Built-up splashes

may overheat and cause smoke or possibly catch fire.

Do not remove the waveguide cover.

Odor Removal

Occasionally, a cooking odor may remain in the oven.

To remove, combine 1 cup water, grated peel and juice

of 1 lemon and several whole cloves in a 2-cup glass

measuring cup. Boil for several minutes using 100%

power. Allow to set in oven until cool. Wipe interior with

a soft cloth.

Turntable/ Turntable Support

The turntable and turntable support can be removed

for easy cleaning. Wash them in mild, sudsy water; for

stubborn stains use a mild cleanser and a non-abra-

sive scouring sponge. They are also dishwasher-proof.

The turntable motor shaft is not sealed, so excess wa-

ter or spills should be wiped up immediately.

Turntable Support

Exterior

Interior

Turntable