Sharp 60705 Manuel d'utilisation - Page 11
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sharp 60705. Sharp 60705 22 pages. Microwave oven with grill and convection
Imprimer la page1. Remove all packing materials from the
inside of the oven cavity and remove any
protective film found on the microwave
oven cabinet surface. Check the oven
carefully for any signs of damage.
2. Place the oven on a secure, level surface,
strong enough to take the oven weight,
plus the heaviest item likely to be cooked
in the oven. Do not place the oven in a
cabinet.
3. Select a level surface that provides enough
open space for the intake and/or outlet
vents. The rear surface of appliance shall
be placed against a wall.
• A minimum space of 20cm is required
between the oven and any adjacent walls.
• Leave a minimum space of 30cm above
the oven.
• Do not remove the feet from the bottom of
the oven.
• Block ing the intake and/or outlet
openings can damage the oven.
• Place the oven as far away from radios
and TV as possible. Operation of the
microwave oven may cause interference
to your radio or TV reception.
30 cm
0 cm
20 cm
20 cm
min
85 cm
4. The oven door may become hot during
cooking. Place or mount the oven so
that the bottom of the oven is 85cm
or more above the floor. Keep children
away from the door to prevent them
burning themselves.
5. Securely connect the plug of the oven to
a standard earthed (grounded) household
electrical outlet.
WARNING: THIS APPLIANCE MUST BE EARTHED
To wire an appropriate plug, follow the wiring code given in 'To replace the
mains plug' on page GB-19.
WARNING: Do not place the oven where
heat, moisture or high humidit y are
generated, (for example, near or above a
conventional oven) or near combustible
materials (for example, curtains).
Do not block or obstruct air vent openings.
Do not place objects on top of the oven.
ELECTRICAL CONNECTION
• Do not allow water to come into contact
with the power supply cord or plug.
• Insert the plug properly into the socket.
• Do not connect other appliances to the
same socket using an adaptor plug.
• If the power supply cord is damaged, it
must be replaced by a Sharp approved
service facility or a similarly qualified
person to avoid a hazard.
• When removing the plug from the socket
always grip the plug, never the cord as this
may damage the power supply cord and
the connections inside the plug.
• I f the plug fitted to your oven is a
rewireable type and in the event of the
socket outlet in your home not being
compatible with the plug supplied, remove
the plug properly (do not cut off ).
• If the plug fitted to your oven is a non-
rewirable type and in the event of the
socket outlet in your home not being
compatible with the plug supplied, cut-off
the mains plug.
• Refit with a suitable type, observing the
wiring code given in 'To replace the mains
plug' on page
GB-19.
GB-10