Sharp Carousel II R-1820 Manuel d'utilisation - Page 17

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sharp Carousel II R-1820. Sharp Carousel II R-1820 32 pages. Over the range convection microwave oven

Imprimer la page

ITo Cook with Temperature Probe]

Suppose you want to roast a chicken to 180°F at MEDIUM HIGHo

Step

,, ,,.

Procedure

Place probe in chicken,,

Insert probe plug into the receptacle

in the

top center of the oven cavity.

Enter desired temperature.

Touch TEMP pad to select temperature

cooking.

Select desired variable

cooking

control

setting°

Touch START pad°

When food temperature is lower than

90°F, _will

be displayed.

Pad Order

D%N

START[

When the internal temperature reaches 90°F, the readout will

display the actual temperature of the food as it increases to 180°F.

When it reaches 180°F as detected by the temperature probe, the

oven will automatically

shut off.

Your oven can be programmed

to maintain

any temperature

from 90°F to 200°F for up to 99 minutes 99 seconds.

This feature can be used to keep food warm

at the desired serving temperature

until you are ready to eat, or food can

be simmered

at a specific

temperature

for up to 99 minutes 99 seconds.

*If you want to maintain

exactly 180°F for 20 minutes in the above example°

istep" '

Pioce u; '

8ide; .......

After step 3, enter desired cookin 8 or "hold-

ing" time.

To maintain

180°F for 20 min-

utes..

Touch START pa&

[ START

]

In the above example,

if the actual temperature

drops below 180 °F during the 20 minute "holding"

time, microwave

energy will

come on long enough to boost the temperature

back up to 180 %°

NOTE: !,, If the temperature probe is not plugged in pro e _r

is defective, TEMP indicator will flash on and off.

When you touch START, TEMP wil! remain. IPROBE Iwill flash on the display, and oven will not turn on

2., tf you are in the process of cooking using the temperature probe and wish to check the temperature you

have programmed, simply touch the TEMP pad, As long as your finger is touching the TEMP pad, the

programmed temperature will be displayed.

[To Monitor

Temperature

lfthe temperature

probe is plugged into the top center of the oven cavity and the probe is placed in water or food,

the temperature

of the water or food can be monitored

on the readouL

Touch the TEMP pad. Temperature

detected

by temperature

probe will appear on display.

(90% to 230°F will be displayed.)

To return to the time of day, touch

the STOP/CLEAR

pad.