Sharp Carousel II R-1821 Manuel d'utilisation - Page 17

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sharp Carousel II R-1821. Sharp Carousel II R-1821 32 pages. Over the range convection microwave oven

ITo Cook with Temperature Probe]
Suppose you want to roast a chicken to 180°F at MEDIUM HIGHo
Step
i.
2_
,, ,,.
,
3.
Procedure
Place probe in chicken,,
Insert probe plug into the receptacle
in the
top center of the oven cavity.
Enter desired temperature.
Touch TEMP pad to select temperature
cooking.
Select desired variable
cooking
control
setting°
Touch START pad°
When food temperature is lower than
90°F, _will
be displayed.
Pad Order
D%N
START[
When the internal temperature reaches 90°F, the readout will
display the actual temperature of the food as it increases to 180°F.
When it reaches 180°F as detected by the temperature probe, the
oven will automatically
shut off.
Your oven can be programmed
to maintain
any temperature
from 90°F to 200°F for up to 99 minutes 99 seconds.
This feature can be used to keep food warm
at the desired serving temperature
until you are ready to eat, or food can
be simmered
at a specific
temperature
for up to 99 minutes 99 seconds.
*If you want to maintain
exactly 180°F for 20 minutes in the above example°
istep" '
Pioce u; '
8ide; .......
4.
After step 3, enter desired cookin 8 or "hold-
ing" time.
To maintain
180°F for 20 min-
_
_
_
utes..
5,
Touch START pa&
[ START
]
In the above example,
if the actual temperature
drops below 180 °F during the 20 minute "holding"
time, microwave
energy will
come on long enough to boost the temperature
back up to 180 %°
NOTE: !,, If the temperature probe is not plugged in pro e _r
is defective, TEMP indicator will flash on and off.
When you touch START, TEMP wil! remain. IPROBE Iwill flash on the display, and oven will not turn on
2., tf you are in the process of cooking using the temperature probe and wish to check the temperature you
have programmed, simply touch the TEMP pad, As long as your finger is touching the TEMP pad, the
programmed temperature will be displayed.
[To Monitor
Temperature
I
lfthe temperature
probe is plugged into the top center of the oven cavity and the probe is placed in water or food,
the temperature
of the water or food can be monitored
on the readouL
Touch the TEMP pad. Temperature
detected
by temperature
probe will appear on display.
(90% to 230°F will be displayed.)
To return to the time of day, touch
the STOP/CLEAR
pad.
16