Sharp Carousel R-228BS Manuel d'utilisation - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sharp Carousel R-228BS. Sharp Carousel R-228BS 29 pages.

C O N T R O L S

WEIgHT DEFROST FUNCTION

WEIGHT DEFROST

The microwave oven is pre-programmed with a timer and power levels so that foods such as pork, beef and chicken can be easily defrosted.

The weight range for this is from 1 – 100 ounces.

Follow the example below for details on how to operate this function.

Example: To defrost meat weighing 12 oz using WEIGHT DEFROST.

Use only containers that are microwave-safe .

DEFROST AUTO/TIME

1. Press the

button.

NOTE:

• Frozen foods are defrosted from 0°F.

• Before freezing foods, ensure food is fresh and of good quality.

• If necessary, shield small areas of meat or poultry with fl at pieces of aluminium foil. This will prevent the areas from becoming warm

during defrosting. Ensure the foil does not touch the oven walls.

• Food weight should be rounded up to the nearest 1 Oz , for example, 6.5 Oz to 7 Oz .

• After defrosting an audible signal will sound fi ve times and the LED will then display time of day, if the clock has been set. If the clock has

not been set, the display will only show "0:00" when defrosting is complete.

TIME DEFROST

This function quickly defrosts food while enabling you to choose a suitable defrost period, depending on the food type. Follow the example

below for details on how to operate this function. The time range is 0:05 – 95:00.

Example: To defrost food for 10 minutes.

1. Press the DEFROST AUTO/TIME

button twice.

Notes for Time Defrost:

• The preset microwave power level can not be changed.

• Before freezing foods, ensure food is fresh and of good quality.

• If necessary, shield small areas of meat or poultry with fl at pieces of aluminium foil. This will prevent the areas from becoming warm

during defrosting. Ensure the foil does not touch the oven walls.

• After defrosting an audible signal will sound fi ve times and the LED will then display the time of day, if the clock has been set. If the clock

has not been set, the display will only show "0:00" when defrosting is complete.

2. Enter the desired weight by rotating the

ENTRY dial until the display shows:

2. Enter the cooking time by rotating the

ENTRY dial until the display shows: 10:00

3. Press the START/+30sec. button to

start defrosting.

(The display will count down through

defrosting time)

3. Press the START/ +30sec. button

to start defrosting.

(The display will count down through

defrosting time)