Sharp Aquos LC 20S4U Manuel d'utilisation - Page 18
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sharp Aquos LC 20S4U. Sharp Aquos LC 20S4U 45 pages. Sharp operation manual liquid crystal television lc-20s4u
Également pour Sharp Aquos LC 20S4U : Manuel d'utilisation (43 pages)
Imprimer la page
Basic Operation
Turning On and Off the Main Power
INPUT21
INPUT3
0 0 0
BACKLIGHT
o
~
0
MENu8
e
8
R8URN
MENU
o
<::::::I:::/ 0
AUDIO
MUTE
ONLY
CC
INPUT
0 0 0
SLEEP
TV mode
INPUT2 mode
INPUT3 mode
Press INPUT to select the applicable input source. The
screen changes in order of INPUT1, INPUT2, INPUT3
and TV mode each time INPUT is pressed.
INPUT1 (COMPONENT) mode
INPUT1
I
480P
. .-
. . . .
Turn on the power of the connected video equipment.
I
NOTE
>
INPUT1 :
Used for video equipment connected to the COMPONENT input
terminals.
INPUT2:
Used for video equipment connected to the INPUT2 input
terminals.
The S-video input terminal is additionally provided for the
INPUT2 terminal. If both the S-video terminal and normal
video terminals are connected with cables, the S-video input
terminal takes priority.
INPUT3:
INPUT3 mode is used to adjust the preset settings and IN or
OUT can be selected. INPUT3 indication is not displayed
when OUT is selected. (For details on setting INPUT3
SELECT, see page 25.)
PIC.FLlP DISPLAY AV MODE
0 0 0
~STEREO
SAP
MONO
I
NOTE
>
• The On-screen display disappears after a few seconds.
Standby
POWER
POWER/WAKE UP TIMER indicator
To turn the LCD TV set back on
To turn off the LCD TV set
Press POWER. The POWER/WAKE UP TIMER indicator will
turn red.
•
To turn off the main power, press POWER again.
•
Press POWER. The POWER/WAKE UP TIMER indicator
instantly changes from red to green and the LCD TV set
is turned on.
On-screen display
Press POWER again. The POWER/WAKE UP TIMER
indicator will turn green.
@
17