Sharp Aquos LC-19LE320E Manuel d'utilisation - Page 21
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sharp Aquos LC-19LE320E. Sharp Aquos LC-19LE320E 32 pages. Lcd colour television
Également pour Sharp Aquos LC-19LE320E : (espagnol) Manual De Manejo (34 pages)
Imprimer la page
tV menu
lock one or more connected devices
Disable the specific external input signals.
1�
Enter your password to access the
menu.
2�
<> to select input Block and press oK
Press
or ≥ to enter the input source list
3�
Press
<> to select one or more input source.
4�
Press
oK to lock or unlock your selected input
source.
5�
Follow the on-screen instructions to exit.
note
•
If you switch to the locked input source, you will be
prompted to enter your password. (If your password is
correct, the locked input source will be unlocked before
the TV restarts from standby.)
•
If your country selection is
Country setting"), you will be prompted to enter your
password every time you access each blocked input
source.
Set / Change password
1�
Enter your password to access the
menu.
2�
Press
<> to select Set password and press
oK or ≥ to enter.
3�
Enter your new password in the
using the digit buttons on the remote control.
4�
Enter your new password again in the
box.
5�
When complete, the TV reruns to the
menu.
6�
Repeat step 1 to 4 to change password.
Clear all parental settings
Reset all the settings in the parental menu.
1�
Enter your password to access the
menu.
2�
Press
<> to select Clear all and press oK or
≥ to enter.
3�
Select
oK and press oK on the remote control
to clear all parental settings.
note
•
If parental settings are cleared, you do not have to enter
password to access Channels in the tV menu.
parental
italy (see page 7 "Step 2:
parental
new box by
Confirm
parental
parental
eco
This function enables you to automatically reduce the
backlight brightness in order to decrease the power
consumption and increase the backlight life span.
1�
menu on the remote control and select
Press
eco and press oK or ≥ to enter�
2�
Press
<> to select on or off and press ≥ to
activate the selection.
3�
Follow the on-screen instructions to exit.
21