Sharp Aquos LC-22SB280UT Manuel d'utilisation - Page 28

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sharp Aquos LC-22SB280UT. Sharp Aquos LC-22SB280UT 36 pages. Liquid crystal television
Également pour Sharp Aquos LC-22SB280UT : Manuel d'utilisation (31 pages)

Sharp Aquos LC-22SB280UT Manuel d'utilisation
Appendix
Troubleshooting
Problem
Possible Solution
• No power
• Check if you pressed POWER on the TV, or on the remote control unit.
(See page
18.)
• Is the AC cord disconnected? (See page
7.)
• Has the power been turned on? (See paoe
18.)
• Unit cannot be operated.
• External influences such as lightning, static electricity, may cause improper
operation. In this case, operate the unit after first turning off the power of the TV or
unpluooino the AC cord and repluooino it in after
1
or
2
minutes.
• Remote control unit does not
• Are batteries inserted with polarity (+, -) aligned? (See page
8.)
operate.
• Are batteries worn out? (Replace with new batteries.)
• Are you using it under strong or fluorescent lighting?
• Is a fluorescent light illuminated near the remote control sensor?
• Picture is cut off/with sidebar
• Are screen mode adjustments such as view mode choose made correctly? (See
screen.
page
20.)
• Strange color, light color, or color • Adjust the picture tone. (See page
26.)
misalionment
• Is the room too brioht? The picture may look dark in a room that is too bright.
• Power is suddenly turned off.
• Is the sleep timer set? (See page
11.)
• Check the Auto Shut Off settings. (See page
26.)
• The unit's internal temperature has increased.
Remove any objects blocking vent or clean.
• No picture
• Is connection to other components correct? (See page
13.)
• Is correct input signal source selected after connection? (See page
13.)
Is picture adiustment correct? (See paoe
26.)
• No sound
• Is the volume too low?
• Have you pressed MUTE on the remote control unit? (See page
11.)
• Is connection to other components correct? (See pages
13-17.)
• Check the audio output of the connected external equipment. Is the volume too low
or mufed?
• When external equiprnent is connected via an HDMI cable, you may need to
configure the audio to be output through the HDMI cable.
• The TV sometimes makes a
• This is not a malfunction. This happens when the cabinet slightly expands and
cracking sound.
contracts according to change in temperature. This does not affect the TV's
performance.
Troubleshooting-Error Message
The example of an error
Possible Solution
message displayed on a screen
• Digital channel signal strength is
• Check the antenna cable. Check that the antenna is correctly setup.
low
• Dioital channel is scrambled
• It is subscription channel. Contact the service provider.
• Audio only
• The channel has audio contents only.
Trouble~hooting·PC.mode
Problem
Possible Solution
• There is no image.
• Make sure the RGB cable is properly connected. (See page
17.)
• Make sure the output signal of the PC and the input signal setting of the LCD TV set
are matched. (See page
17.)
• Some software prohibit video playback on an external display when playing back a
video with a notebook PC. This is not attributable to a problem with the LCD TV set.
• There is no sound.
• Make sure the PC audio cable is properly connected. (See page
17.)
• Check if the mute function activates, or if the volume is set to minimum. (See page
11.)
• The text is blurred.
• Adjust "Clock" and "Phase" using the PC Setting menu. (See page
26.)
• The image is not displayed in the • Adjust "Hor Position" and ''Ver Position" using the PC Setting menu. (See page
26.)
center of the screen.
@-27