Sharp AQUOS LC-32SB24U Manuel d'utilisation - Page 26
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sharp AQUOS LC-32SB24U. Sharp AQUOS LC-32SB24U 33 pages. Lcd color television
Également pour Sharp AQUOS LC-32SB24U : Manuel de l'utilisateur (32 pages), Manuel d'utilisation (33 pages), Manuel d'entretien (10 pages)
Imprimer la page
On-Screen
Display Menu
This setting
allows you to optimize
the settings
of
Digital broadcasting.
Example
[ _]
Digital Setup
1 Press MENU
to display
the MENU screen,
and then
press _1/_- to select "Digital Setup".
2
Press A/_'
toselect
a specific
adjustment
item,
and then press ENTER.
3
Press A/_'
(or 4/_-)to
select the desired
setting,
and then press ENTER.
4
Press MENU
to exit.
You can output
digital audio to an AV amplifier
or
similar device
whose
DIGITAL AUDIO INPUT terminal
is connected
to the DIGITAL AUDIO OUTPUT
terminal
on the %/. Please select an audio output format
compatible
with the audio format of the program
you
are watching
and the equipment
connected.
PCM: The optical output terminal outputs audio signal
in PCM form. If your digital audio system does not
support Dolby Digital, select "PCM"
Dolby Digital: The optical output terminal outputs audio
signal in Dolby Digital form. It reproduces sound from
surround program of digital
The current
version
of the TV software
is displayed.
This function
allows software
updates
by inserting
a USB memory
device with the update
file into the
SERVICE terminal
on the %/.
To check for the availability
of a software
update,
visit
www.sharpusa.com.
If you have any questions,
please
call 1 800 BE-SHARP
(800 237 4277).
Do not remove
the USEI memory device
or unplug the
AO cord while the software
is being updated,
• Be sure to properly
follow the whole procedure
described
below,
step by step, Otherwise,
for
example,
the TV cannot
read the data in the USE
memory device
and software
updating
will fail,
1
Insert the USB memory
device
with the update file
into the SERVICE terminal on the %/.
2
Press MENU
to display
the MENU
screen,
and
then press
_/1_
to select "Digital
Setup".
3
Press A/T
to select "Sottware
Update",
and then
press
ENTER.
If you have already set the Seclet No, go to step 4
[_
Digital
Setup
Software
Update
j
4
Input
the
4 digit
secret
number
by
using
0-9.
_
Digital
Setup
5
Press ENTER
to start checking
the data in the
USB memory
device.
26